[Bill Brunsell]

ive heard that 021 belt CANT be used on a f-cat. Ive only heard people using 020 and 035 belts. The 020 is softer and the 035 is stiffer.

catattack57:
If the 031 raised ur rpm's it's either cus the 020 belt was more worn than the 031, or the 031 was slightly longer or wider. Did u hear all this from a dealer or who?? Im not trying 2 bash anybody here :chug: , but ive heard otherwise and if all the dimmensions r the same on the belts it shouldnt affect rpm.

 

[Bill Brunsell]

<div class='quotetop'>QUOTE (catattack57 @ Feb 9 2007, 08:33 PM) <{POST_SNAPBACK}></div>

[attachment=63185ICT0188__Small_.JPG]<div class='quotetop'>QUOTE (03f5snopro @ Feb 8 2007, 05:08 PM) <{POST_SNAPBACK}>

ive heard that 021 belt CANT be used on a f-cat. Ive only heard people using 020 and 035 belts. The 020 is softer and the 035 is stiffer.

catattack57:
If the 031 raised ur rpm's it's either cus the 020 belt was more worn than the 031, or the 031 was slightly longer or wider. Did u hear all this from a dealer or who?? Im not trying 2 bash anybody here :chug: , but ive heard otherwise and if all the dimmensions r the same on the belts it shouldnt affect rpm.[/b]

I don't mean to bash either, but I have belts in the garage that are older than you bud. I did not say you could use a 021 belt on a F7, but you can, very good belt for 500ft drag racing with the proper clutch set up. Wouldn't trail ride with one, but they work great for grass drags. Now, the 031 is a very hard belt, without clutching changes, it will run more rpms with the same clutch set up used with the 020, a softer belt will lower peak rpms as the clutches will get better grip. Now if my 020 was more worn than a new, wider, 031, my rpms would be lower because a worn belt will not let the clutches fully shift out, causing an over rev condition. I didn't hear it from a dealer or "who" , over 30 years of tuning and racing have taugt me a few lessons along the way, at least I think they have. In the pic, guess which sled is mine.
[/b][/quote]

k. thanks. so the 031 revs higher b/c it slips?

 

[Bill Brunsell]

How dus a worn belt not give u the same top speed as a new one? I understand the clutches dont shift all the way out but b/c of the narrower width wouldnt it sit just as far down?