Arctic Chat : Arctic Cat Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
21 Posts
Discussion Starter · #1 ·
I just had an ods clutch kit installed. About two weeks later i purchased a speedwerx belt that is slightly softer compound, wider, and a hair longer. When i installed the belt i had to remove a shim or two and now it sits about 1/8-1/4" high on the secondary. When the clutches engage it gives a quick chirp and then goes away. I runs great, but is the chirp something to be concerned about or will that go away once the belt is fully broken in? If so how would i go about fixing it. Thanks
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top