[WNYCatRider]

Was wondering how you remove the beak on the hood of the Firecats, would like to take mine off for cleaning but wanna make sure I do it right. THanks Again

 

[3x]

Open your hood & take off the air intake hose from your hood. There are two rubber band type retainers on each side of the intake on the inside of your hood holding the beak in place, you need to remove those. Close your hood, lift the front of the beak up & slide it out & away pulling it towards the front of the sled. There are two tabs on the back of the beak that hold it onto the hood & will slide right out.