Arctic Cat Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Good evening my cat 500 will not start I have done the following, replaced the battery, replaced starter solenoid, replaced the carburetor, replaced the starter, an replaced the relay switch next to the starter solenoid, replaced all fuses.
Still I turn the key on an only here a click from the starter silinoide, the head lights turn on the fan turns on but the engine will not turn over. The crazy thing is when I use my jumper box an directly connect to the starter the engine turns over an starts . 🤔 if anyone has an idea what can be causing this I'd be greatly appreciated I'm truly stumped.
 

·
Administrator
Joined
·
37,841 Posts
Start checking all your ground connections. Frame , engine take them off clean them with a wire brush and rubbing alcohol.
Kill switch functioning correctly ?
Ignition switch functioning correctly?
It really sounds like a loose wire or a bad ground
 
  • Like
Reactions: Wallamatogus
1 - 2 of 2 Posts
Top