Arctic Cat Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter #1
So I noticed that where the drain hose is located(near the water pump and main hose) it is starting to wear through. I replaced it and it is starting to do the same darn thing. Can I just zip tie it to the hose going up to the thermostat housing? If not, where else would be a good spot?

Thanks!
 

·
Registered
Joined
·
1,502 Posts
Yes, zip ties are your friend with that drain hose. I have mine zip tied to the larger hose that runs up to the tsat, then zip tied a few more times to the odd place as it makes it way over to the exhaust outlet.
Anything that is wire or hose related, I zip tie do it can flop around or vibrate against something.
 

·
Registered
Joined
·
5 Posts
Discussion Starter #3
Yes, zip ties are your friend with that drain hose. I have mine zip tied to the larger hose that runs up to the tsat, then zip tied a few more times to the odd place as it makes it way over to the exhaust outlet.
Anything that is wire or hose related, I zip tie do it can flop around or vibrate against something.
Thank you very much!
 
1 - 3 of 3 Posts
Top