Arctic Chat : Arctic Cat Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
205 Posts
Discussion Starter · #1 ·
After reading up on all these posts about oil pump adjustments it seems to most that when the marks are lined up from the factory thats in the range of 35:1ish. Is it safe to say thats the ratio when your marks are lined up?? I know my F6 was 35:1 and I turned the rod 2 turns out and came up with 53:1 but I never checked if any marks were lined up before I started the project. I know they wont line up when adjusted properly.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top