Arctic Chat : Arctic Cat Forum banner

99 ZR 700: Tether???

3851 Views 9 Replies 4 Participants Last post by  mcatzr700
Did the 99 ZR 700 have a tether option from the factory? I have looked at a bunch of parts diagrams I do not see what I have on my new to me 99 zr700 console. Check out the attached image. Purple and brown wires run to that part, which are typically kill switch colors. What I don't understand is the 99 zr700 is an open ignition, so putting a tether in that part seems like it would kill the ignition (completing the circuit). Tracing the purple and brown wires it does look like it goes to the factory wiring harness, not something that someone spliced in.
Light Automotive tire Motor vehicle Automotive design Wheel
See less See more
1 - 3 of 10 Posts
Did the 99 ZR 700 have a tether option from the factory? I have looked at a bunch of parts diagrams I do not see what I have on my new to me 99 zr700 console. Check out the attached image. Purple and brown wires run to that part, which are typically kill switch colors. What I don't understand is the 99 zr700 is an open ignition, so putting a tether in that part seems like it would kill the ignition (completing the circuit). Tracing the purple and brown wires it does look like it goes to the factory wiring harness, not something that someone spliced in. View attachment 373690
That is a plug for a heated shield.
Itit
Thanks, I did not expect that based on the wire colors going to that part. It's crazy I don't see it listed anywhere on any of the parts sites.
It is an add on. Cant remember the wire colors, but the female end is pure heat shield.
Does it use an RCA style jack? It would be cool to use it if I could but I don't know what cable end goes into it. Something like OEM Arctic Cat Helmet Electric Heated Shield Coil Cord 4202-922 AC19A-A73 | eBay
That particular one on your sled wont take the typical RCA jack.they used to sell one that you put in and turned it to lock it in place.
1 - 3 of 10 Posts
Top