Arctic Chat : Arctic Cat Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
155 Posts
Discussion Starter · #1 ·
My sled has a power issue when it starts to get warm (basically there is no power). I put new plugs in it and put new fuel in it with some seafoam (it occured directly after I put some fuel in it) nothing has changed. I have spoken to a ArcticCat dealer and they suspected the coil. I took the coil off but want to test it to make sure it is actually bad before I buy the new one.

Any idea what the resistances of the coil should be? or what else could be wrong with the sled?
 

·
Registered
Joined
·
3,340 Posts
Primary side should be .30 ohms. secondary should be 16300 with the caps on. I would suspect stator before coil. those numbers should be 450 br-g and 46 b-g. this will be a 3 wire plug going to the computer from the stator.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top