Arctic Chat : Arctic Cat Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
4,106 Posts
Don't do anything, other than the handle bar modification. The stock exhaust is about as good as it gets for that engine and boring the cylinders makes no sense whatsoever. If you bore the cylinders out you'll have to replate them and you won't gain any performance, probably lose power, trying to make up a big bore kit. You'll just spend huge dollars and go backwards. I don't know how you'd adjust the fueling with that old EFI system, so just leave the engine stock.

There are a number of ergo and suspension mods you can do. Look at moving the steering post forward, handle bar riser block, TSL rear suspension, AGLT front suspension, to name a few.
 
1 - 1 of 1 Posts
Top