Arctic Chat : Arctic Cat Forum banner
1 - 5 of 5 Posts

· Registered
Joined
·
158 Posts
Discussion Starter · #1 ·
My Buddy has a 96 zrt 600 and it only fouls the center cylinder plug. We checked and set up the carbs as per spec. he does have aftermarket pipes but I don't know which make. We are kinda stumped as the mag side and clutch side are running perfectly.

thanks in advance.
 

· Registered
Joined
·
5,691 Posts
Check the compression on that cylinder, it should read around 120psi. I had the similar issue with my ZRT 800 and that it would always foul the center cylinder when idling or low rpm riding. Turned out to have a scuffed piston and cylinder.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top