Arctic Cat Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
124 Posts
Discussion Starter #1
I have a 93 zr440, my 10 year old rides, I put some newer snopro bars on it with the aluminum throttle block, and forgot about the carb switches and kill switch being wired thru the throttle linkage and now it wont run unless I plug the old bars in. is there a way to bypass all that stuff???
thanks for any help, he really wants to ride while off for xmas break.
 

·
Registered
Joined
·
6,671 Posts
There should be a 3 prong connector you can put a jumper across. Only the key will work with the jumper in place.

Is the kill switch roundish from an open ignition system? If you jumper the carb switches, the kill switch can still work but work backwards.
 
1 - 2 of 2 Posts
Top