Arctic Chat : Arctic Cat Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
258 Posts
clutch spin

First there should not be any alum on the shaft as it is steel on steel unless something was smashed between the two. In that case it should be filed off. Those two surfaces should be smooth. Emery is not going to do it as it would just round the high spots off. If anything try flat and round files to clean them up. Slip on and spin the clutch without the bold and see if you can feel and catches or high spots yet before mounting.

Sounds like I would try to use warranty if that new. Have them fix the seal. That would bother me as well.
 
1 - 1 of 1 Posts
Top