Arctic Chat : Arctic Cat Forum banner
1 - 8 of 8 Posts

·
Registered
Joined
·
24 Posts
Discussion Starter · #1 ·
After my 2011 mudpro is running for approx 5 min i can hear my 4 wheel drive kicking in and out. My switch is in 2 wheel drive. The 4 x4 light does not come up on my display while it is doing this. Any help would be awesome.
 

·
Administrator
Joined
·
40,682 Posts
It might have got water in it. Pull it apart and check for water or oil. Also make sure the plug is clean and dry then dielectric grease it
 

·
Administrator
Joined
·
40,682 Posts
Dry it good with electrical contact cleaner and try it
 

·
Registered
Joined
·
1,381 Posts
For what its worth, mine did that cuz the battery was low.
 

·
Registered
Joined
·
19 Posts
For what its worth, mine did that cuz the battery was low.

Mine won't even go into 4x4 it's always in 2 and the display stopped working, only lights up red. I'm really hoping it's the battery. I've owned my mudpro for 3 years now and I have 4 LEDs connected to the battery with a switch. I've never heard of it acting like that from being low before this but I really hope that's all it is.
 

·
Registered
Joined
·
1,381 Posts
put it on a trickle charge overnight. see what happens?
 
1 - 8 of 8 Posts
Top