I have a 2018 Alterra 300 that I would like to add a winch to. It has mounting holes for a winch but the Ironton 2500 I bought doesn't match the holes. Is there a winch that matches the holes or an adapter plate? I don't need a heavy duty winch, just something to get me out of trouble when I get stuck. This is my first post so thanks for the advice. BTW, I really enjoy my ATV.
Trying to put a winch on my 2018 Textron Alterra 500. Literature says it is winch ready. Dealer couldn't find a mounting plate. Can anyone point me in the right direction on how and what to do to mount winch.
Warn or champion. I put winch on this model but the big pain was that you'll likely need to shorten the bolts closest to the back of the ATV to get them in. There is an L in the frame that makes most stick winch bolts too long to get in there. And if you have someone with tiny hands that'll help too. It's pretty tight and none of my tools fit well in there.
Been working on an AC 300 for a friend and it has me stumped. Idles fine but bogs out when you rev it up. Has a new carb , cdi and coi all of which have changed nothing. any suggestions???
My f1000 has been a work in progress baught 2nd hand the oil light is on and it blinks on screen saying OIL yet im topped off and when i start it its burni g plenty of oil. You can tell from the exhaust so i believe the oil pump is working? Any one have any ideas?
Hey I have the mud pro. I notice belt shavings coming out snorkel. So I opened up clutch cover and my belt is rubbing. The belts sits quite a bit higher over the top of secondary. How would I go about getting my belt to sit I’d say 1 cm or so lower to at least flush with secondary.
Background, 2 years ago throttle stuck, I took the atv to Basspro and they said that my throttle body had seized and needed replacing to the tune of $700. Fast forward to present, I went to run the atv and the throttle was stuck again. I removed the throttle body, stripped everything off of it...
