Im looking at buying an 09 M8 sno pro tomorrow, the only thing is that it starts right up but then dies right away. It does the same thing every time. What could be causing this? I really doubt that its anything too serious but I just wanted to check. Thanks for the help guys!
2009 M8 Starts but then dies instantly???
1 - 3 of 3 Posts
Joined
·
3 Posts
Hi did u ever figure this out mine is doing the same thing
1 - 3 of 3 Posts
Join the discussion
Recommended Reading
-
Need to install electric starter 08 m1000
M Series/Mtn.Unable to find a starter kit getting old- 1
- 29
-
Back in the saddle · updated
-
02 MTN Cat 800 - hesitation issue
M Series/Mtn.Have an 02 mountain cat 800 with a hesitation issue that i have been unable to trace down. When cruising (anything above 5 mph or so) hitting the throttle it takes off normal. When sitting still after coming to a stop, when you hit the throttle it bogs and will sit at about 3000 rpm for up to 15...- 20
- 295
-
cjohnson355 · updated
-
2016 Brand New???
M Series/Mtn.Came across a guy selling a M 9000 Turbo 162" Sno Pro Limited-ES and a M 8000 162" Limited Green. Both 2016. Straight out of the crate with 0 miles. Asking $13,500 for both. I have no idea what a decent price for brand new sleds 4 years old. Are there any potential problems to look for? TIA- 0
- 48
-
TM3 · updated
-
2006 m7 replaced diamond drive but now much clutch isnt adjusted right
M Series/Mtn.Hello, Clutches seem to always get me confused. I have replaced my diamond drive on the sled and since then my belt is extremely loose. Why would this be happening? Something I should do with my clutch? I can send pictures if that would help. Sent from my SM-G930W8 using Tapatalk- 2
- 233
-
Recoil Pawl won't stay tight
M Series/Mtn.I have a recoil on a Arctic Cat M7 that keeps coming loose where it won't catch the starting cup. Basically, I rebuilt the recoil after my rope broke but now the nut on the inside of the recoil won't stay tight. If I tighten it too much, the rope won't retract once I pull it. If I leave it a...- 2
- 64
-
MonsterM7 · updated
Join now to ask and comment!