the bike was running and the dash shut off and i cant seem to get any power at all, i turned the bike off by the key and now it wont do anything at all, i just put in a new starter relay in it,checked the fuses and all look good under the dash.
The main fuse (30 amp) is under the seat near the battery.
I would also check the ignition connector. This happened on my 366, not the ignition key switch, but the plug that it connects to the harness, had the center connector break. Pull it apart and use a wire to jump it out and see if it comes alive.
I ended up cutting it out and soldering/shrink wrap the ignition switch to the harness.
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.