Arctic Cat Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
Sons atv will work in reverse,neutral and low. As soon as it shifts into high a grinding noise occurs and won’t move. Accelerate and grinding persists. Adjusted link and worked for 3 feet went back to grinding. Any advice will help these kids are getting a little too fast to be driving it in low all the time lol
 

·
Registered
Joined
·
96 Posts
I had a 300 that was so finicky when adjusting the gear selector. Drove me nuts getting it right.

Despite the manual saying to adjust to the neutral, reality was it was 100% trial and error for me.

Sent from my Pixel 2 XL using Tapatalk
 

·
Registered
Joined
·
3 Posts
Discussion Starter #3
That being said I had the adjustment rod right if and was changing it by hand and still grinded all bit one time. Could the teeth be broken or just not engaging of anyone ever came across that?
 

·
Registered
Joined
·
141 Posts
Is the idle set too high at all? When my idle is high in winter sometimes it's hard to get into H until I back off the idle a bit.
 
1 - 5 of 5 Posts
Top