Hey guys heard alot of knocking under me this morning, then had no 4 wheel drive got to the house looked under found A part. Lying on bottom plate and realized I had no front inner drive shaft.
There are just a hole in front a hole in back where the shaft use to be.
My question is what part do I search for to fix this problem.
Best to get the entire shaft. About $200 US new. Part number 0502-918
Also, if it all fell out, you will likely need the front spring. Part number 1402-521
Background, 2 years ago throttle stuck, I took the atv to Basspro and they said that my throttle body had seized and needed replacing to the tune of $700. Fast forward to present, I went to run the atv and the throttle was stuck again. I removed the throttle body, stripped everything off of it...
Hey I have the mud pro. I notice belt shavings coming out snorkel. So I opened up clutch cover and my belt is rubbing. The belts sits quite a bit higher over the top of secondary. How would I go about getting my belt to sit I’d say 1 cm or so lower to at least flush with secondary.
Okay I’m new to the page but I have a 2007 artic cat 400 Manuel 4x4 I got it used and it ran great when I got it but I took it riding and had no issues until it cut off when my buddie got stuck. It refused to start so we pulled it back. After we got it back it started and ran like normal then...
Here's my situation 2008 650 H1... key in ignition switched to on - everything's good (pod display, engine start button fires right up) things are normal. Now turn key to "lights" and engine shuts off, pod display goes blank (nothing, not even the red background) BUT the lights are on and...