Arctic Cat Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Hi there,

New to the forum. I recently purchased a used 2006 Crossfire 600 EFI (orange). I ran it for a few hours one trip with no issues. The second time I took it out, within about 1 hour of running, the digital display and speedo just quit working. The headlights and taillights also gave out. The sled runs fine otherwise.

Im not super mechanically inclined however I would love to try fix this on my own (without taking it in).

Does anyone have any suggestions on where to start looking? A general once over of the wiring doesn't show any gross abnormalities (no corrosion, disconnections etc.).

Your help would be much appreciated!
 

·
Premium Member
Joined
·
953 Posts
My guess would be stator or the regulator. I'm not "up" on what the resistance of the windings should be so If it were me i'd call the dealer and ask them for that info. And if it ohms out ok then I'd bet on a regulator problem. Check the fuses too if it's got any. Maybe something simple if you were "lucky" lol.

Steve
 
1 - 2 of 2 Posts
Top