Arctic Chat : Arctic Cat Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
The housing around the drain screw in my front gear case(diff case?) was rippen mud heard nosie in front end started puken oil found a 2inch perfect circel around drain screw.blew if off...? how hard and where do i start....i am a marine mechanic this is the first atv i am about to work on....it looks like the hole front axel gearbox all has to come out and taken apart...any tips would be apreceated
 

·
Administrator
Joined
·
40,728 Posts
Yes pull the axles from the diff it has to come out. Here is a factory shop manual you can download for free
www.mymowerparts.com
 

·
Registered
Joined
·
656 Posts
Being an 05, diff pin issues aren't common, so you likely took out the side gears like I did in my 06.
You are at minimum going to need the case half and a ring gear assembly, as the side gears are not serviceable.
 
1 - 3 of 3 Posts
Top