Arctic Chat : Arctic Cat Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
I bought a 1997 ZR 580 EFI with the motor in pieces in a tub! It is all back together now, but I do not know where the coolant hose that attaches to the 90 degree fitting on water manifold on the PTO side goes. Does anybody have one of these sled that they can look at or take a picture of? Thanks!
 

·
Registered
Joined
·
2 Posts
Discussion Starter · #3 ·
Thanks for the picture, but those aren't the hoses in question. The hoses I was confused about aren't pictured in the illustrated parts breakdown. I went to the local dealer after the holiday weekend and they pointed me in the right direction after they refreshed their memory on the older ZRs. Here is the proper routing: hose from the water manifold on the heads goes to the mag side of the throttle body, the PTO side of the throttle body then goes to the double-T fitting in the main water hose. The other fitting in the double-T is not used, which I wasn't aware of and was making it even more confusing.
 
1 - 3 of 3 Posts
Top