Arctic Chat : Arctic Cat Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
8 Posts
Discussion Starter · #1 ·
Hey all, So I'm putting a 95 jag skid in my older 1990 jag. going from 116" to 121. The skid i have is not the later 90's one with longer travel. Ive seen that called the ETT swap??? but it's still a vast improvement. Need to know the tunnel bolt hole locations. I think the front is the same?? seems that way when I put both skids side by side. Need to know center to center on the main skid bolts on the tunnel. And the driveshaft to the front hole just to verify... Any measurements would be a large help as I don't have the donor sled.

I'm at a standstill without measurements


Brent
 

·
Premium Member
Joined
·
3,416 Posts
on our 1998 jag
non ett
center to center mount bolts in the tunnel
23 inches
center of front mount from center of jackshaft 11 3/4 inches
center of front mount up from lip of tunnel
4 1/2 inches
 
1 - 6 of 6 Posts
Top