Arctic Cat Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
Hello all, i have a 1995 580 ext powder special that i wan to delet the oil injection system from it. The reason for doing this is when i bought the sled it was just rebuilt from a pump failor and do not want to put a new pump on.

my question is, there is a oil line that gose from the pump to the bottom of the the crank case, what dose it feed? dose it feed the center crank berring?



thanks for the help
 

·
Registered
Joined
·
1,239 Posts
my brother bought a sled that had no oil injection , i;ll tell you what it look like, the oil injection cable wasn;t hooked up to the pump, it had a peice of hose over it and out of the way, then on the mag cylinder head bolts it had a peice off plate holding a little plastic bottle from a ski-doo 440, 97 , that was hooked up to the oil pump, that lube the crank bearings, every time he fill up he would add oil to the little bottle,, he had no problems with the motor , just dont forget to add oil to the bottle.
 
1 - 2 of 2 Posts
Top