Arctic Chat : Arctic Cat Forum banner
1 - 1 of 1 Posts

120 Posts
There are 3 nuts on each side of the tunnel on the inside 6 nuts total.
You'll need either a 7/16", or a 3/8" deep well socket with a long enough extension to reach up inside the tunnel for the front 4 nuts, the back 2 are pretty easy to get at.

If the stud's break when you take the nuts off, you'll have to make new stud's to put in the seat pan when you re cover the seat.

  • Like
Reactions: Jericho
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.