Arctic Chat : Arctic Cat Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
67 Posts
Discussion Starter · #1 ·
i have been going threw this sled from one end to the other,just put new pistons and rings in and she runs alot better.then i happen to notice that the clutch(hex) seemed to be not balanced well from the naked eye so i pushed on the clutch and it moved alittle inward and out,clutch was not loose.was wondering if this is normal or are the bearings going bad on the crank?thanks to all for your info,Ti Cat
 

·
Registered
Joined
·
2,210 Posts
Its not normal for movement in the clutch or the crank. When those hex get wore out their loose as heck. More than likely the clutch is wore. If you crank is moving around as much as you can feel wouldnt run at all
 
1 - 2 of 2 Posts
Top