09 700 efi h1 not charging

maks grebenc · 2023-05-26

09 700 efi arctic panther It doesnt charge. Regulator tested and works, stator tested and works batery is new. What else is there to check? I read some posts about this bout couldnt find any solutions that worked. Any help would be apriciated.

doorfx

· #2 · 3 d ago

How did you test the VR/rectifier?

2013 700 XT TRV EPS :
28" Bighorns on bed linered 08 Prowler rims , Wireless winch remote, 3000LB. Warn winch, Heated front and rear grips, Cat relay wiring harness for accessories, LED light bar, 08 650 trv LTD rear box, Heated rear seat, Elka stage 3 shocks all 4 corners, Aftermarket A-arm bushings, aftermarket sway bar bushings(prototype), Deluxe brush guard bumpers front and rear, Red anodized Hause fairlead, beverage opener winch hook, Synthetic winch rope, RTR motor mount bushings, Dynojet PC5 programmer, Dynojet Autotune, [/B]

07 500 Gone but not forgotten;
Dynojet/142m/45p/3rd/3turns--Clipped and drilled--Unifilter--Easy adjust PMS--L.C.V. mod--AC Swaybar--Exhaust mod--2"Snorkels--Sanny shock bushings-- Airdam stage 1--PSC phase 2--21/ 23gr rollers--Dalton yellow spring--.7mm shim--Sanny Steerlites--RTR Flex Bracket--2 up seat / pegs--Tach--AC handguards--28" Outlaw mst's--Skull tailight--Skull shifter--Self Resetting Breakers--1" Wheel spacers--Customcncparts Steering Damper--AC deluxe handwarmers--6000k HID'S hi/lo--AC Deluxe Bumpers--Inline Fuel Filter-- O2 sensor \AFR guage--Black Magic Full Stainless Exhaust System--Wireless Winch Remote--29.5 Outlaws--Fox Podium X Rear Shocks--

It's mind over matter,If you don't mind,
It just doesn't matterCat happy

No Boost No Bottle
just balls and throttle

Reply

Save

Like

maks grebenc

Discussion Starter · #3 · 2 d ago

doorfx said:
How did you test the VR/rectifier?

did it by the procedure and on running atv. Also had a spare one and tried with it but same result.

Reply

Save

Like

doorfx

· #4 · 2 d ago

So what voltage are you seeing at the battery when it’s running?

2013 700 XT TRV EPS :
28" Bighorns on bed linered 08 Prowler rims , Wireless winch remote, 3000LB. Warn winch, Heated front and rear grips, Cat relay wiring harness for accessories, LED light bar, 08 650 trv LTD rear box, Heated rear seat, Elka stage 3 shocks all 4 corners, Aftermarket A-arm bushings, aftermarket sway bar bushings(prototype), Deluxe brush guard bumpers front and rear, Red anodized Hause fairlead, beverage opener winch hook, Synthetic winch rope, RTR motor mount bushings, Dynojet PC5 programmer, Dynojet Autotune, [/B]

07 500 Gone but not forgotten;
Dynojet/142m/45p/3rd/3turns--Clipped and drilled--Unifilter--Easy adjust PMS--L.C.V. mod--AC Swaybar--Exhaust mod--2"Snorkels--Sanny shock bushings-- Airdam stage 1--PSC phase 2--21/ 23gr rollers--Dalton yellow spring--.7mm shim--Sanny Steerlites--RTR Flex Bracket--2 up seat / pegs--Tach--AC handguards--28" Outlaw mst's--Skull tailight--Skull shifter--Self Resetting Breakers--1" Wheel spacers--Customcncparts Steering Damper--AC deluxe handwarmers--6000k HID'S hi/lo--AC Deluxe Bumpers--Inline Fuel Filter-- O2 sensor \AFR guage--Black Magic Full Stainless Exhaust System--Wireless Winch Remote--29.5 Outlaws--Fox Podium X Rear Shocks--

It's mind over matter,If you don't mind,
It just doesn't matterCat happy

No Boost No Bottle
just balls and throttle

Reply

Save

Like

maks grebenc

Discussion Starter · #5 · 2 d ago

doorfx said:
So what voltage are you seeing at the battery when it’s running?

when it starts it drops to 11.9 than in goes to 12V and nothing over.

Reply

Save

Like

660catman

· #6 · 2 d ago

You should be seeing 14.2-14.6 ish while running. It should not change with or without the lights on. If you’re only seeing 12, the battery is being drawn down when it’s running.

Reply

Save

Like

maks grebenc

Discussion Starter · #7 · 2 d ago

660catman said:
You should be seeing 14.2-14.6 ish while running. It should not change with or without the lights on. If you’re only seeing 12, the battery is being drawn down when it’s running.

meaning its charging but something is sucking up more power? or is it not charging, im consfused.

Reply

Save

Like

660catman

· #8 · 2 d ago

It’s not charging enough. With a failing VR you will see voltage drop when lights are on or extra current is drawn.

Reply

Save

Like

tiggershark

· #9 · 2 d ago

09 700's had some wiring harness problems. It's possible that the VR testes out right but the wires leading off are chaffed.

Reply

Save

Like

maks grebenc

Discussion Starter · #10 · 2 d ago

tiggershark said:
09 700's had some wiring harness problems. It's possible that the VR testes out right but the wires leading off are chaffed.

the wires that are exposed seem to be fine. I didnt open up the protective tube where all the wires all run through though. Is it possible they rubbed themselfves off inside? this is a pain in the ass

Reply

Save

Like

Top Contributors this Month