Arctic Cat Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
72 Posts
Discussion Starter #1
I took my power valves out and cleaned them. Can i re-use the gasket on the valves as it isn't the paper kind of gasket or is it recommended to replace them with new ones
 

·
Registered
Joined
·
125 Posts
They are a crush style gasket and should be replaced. That being said, I serviced my valves on my Sabercat for years and nevere replaced the gaskets and had no issues with leakage. I always cleaned the gaskets well before reassembly.

Good Luck.
 

·
Premium Member
Joined
·
3,920 Posts
I have never had to replace the APV gasket, and I've cleaned the APV's numerous times on my Firecat and F8 when I had them. You should be fine as long as you don't damage it when you remove it.
 
1 - 4 of 4 Posts
Top