Arctic Chat : Arctic Cat Forum banner

1 - 9 of 9 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter #1
Hey Iam new to the forum but I got a ? I hv a 07 arctic cat 400 4x4
With susuki motor it has a dyno jet amr monster coil Ebc clutch kit
But it still goes high gear in reverse and u hv to hammer it to pull
My 30 in itp how do I fix this I hear there is a mod for it
THANKS FOR ANY HELP
 

·
Premium Member
Joined
·
1,954 Posts

·
Registered
Joined
·
338 Posts
The mod works for manuals only. There is a shift cam that has a channel which must be welded up and then milled as a mirror image. It changes reverse from high range to low, but it also flip flops forward high and forward low on the range selector from L-H-R to H-L-R.

The last link has part numbers. If you buy new the Suzuki parts should cost less than AC.

It's been two years since I got my cam, but its still sitting on a bookcase:greensad: My goal is to get this mod completed before summer is over and to do a write up on the install.

http://www.arcticchat.com/forum/gen...ers-reverse-fix-has-started-update-works.html

http://www.arcticchat.com/forum/uti.../300154-04-400m-reverse-mod-part-numbers.html
 

·
Registered
Joined
·
5 Posts
Discussion Starter #8
Thanks for help guys but nw I got another problem went riding last weekend and striped my pedal shifter out were cn I find one of these aftermarket r oem all help will be appreciated thanks
 
1 - 9 of 9 Posts
Top