I was riding last weekend and my service engine light started flashing. Checked it, and it was a servo. Started investigating the exhaust valves and they were not very dirty. I went to the other side of the cable and found that both of the cables were off of the servo drum. I verified the cable length, and put it back together. One cable was out of spec., and has been adjusted. Anybody else ever experiance this? Could someone also tell me the cable length? I set them at 33mm. My fear is that I am going to trailer it an hour plus to ride, and it going to happen again on the trail. I really don't want to be fighting with this out on the trail.