Arctic Chat : Arctic Cat Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
04 zr 900 apv servo will open vales but not close them!!!
Hi guy new to the site have a problem that I am trying to figure out.first i will tell you that my valves are clean cables look good. My coolant temp started to flash servo code so I took cover off and the cable was in hooked put back on reved it on the stand servo opened the valves but would either not come back or spit the cable off. So I'm just looking for ideas thanks for any help guys great site!!!
 

·
Premium Member
Joined
·
3,379 Posts
maybe the servo is 180 degrees out
that is what our 600 was
the po couldnt get it to run right
ther is 2 positions for the cables to hook into
rotate servo by hand with cables off
then install cables
see what happens
 

·
Registered
Joined
·
3 Posts
Discussion Starter #5
Thanks guys got it fixed thanks to the boys over at barnstead motor sports ended up getting a new servo motor now it's back to new
 
1 - 5 of 5 Posts
Top