Arctic Chat : Arctic Cat Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
03 firecat F5 500 carburetor engine froze up due to no oil. Will an 05 sabercat 500 carburetor engine swap work if it doesn't have the power valve exhaust. Is it possible to just use the main engine block and pistons, etc and use my power valve exhaust and carburetor and any other accessories from mine to make it work?
 

·
Registered
Joined
·
12,856 Posts
Well the crankcase itself is identical. However the CDI's are different due to one having the power valves. It may still work if you leave the servo motor hooked up without the cables on it. This would fool the CDI into thinking all is good. You don't want to change wiring to include the SC CDI as the SC CDI is no longer available. Carb flanges and reeds are different and even the clamps to hold carbs on are different. It could be a project and a half. Air intake in front of the carbs are the same part though.
 
1 - 2 of 2 Posts
Top