Arctic Chat : Arctic Cat Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
Called my dealer and was advised that the SS suspension only comes with one set of springs and I need the heavier springs. So, I would like to replace my 02 ZL800 efi ss suspension with a ZR suspension which will kill two birds with one stone (the electric shock imminent expensive failure and to get a better ride since the suspension is now way too soft.
Does anyone know what would fit as a relatively straight forward bolt on replacement from a ZR. I am very handy but do not want to start measuring and drilling and cutting and...
Many thanks
Ed
 

·
Registered
Joined
·
34 Posts
I put a 2004 zr 900 rear skid on my 2003 zl esr 800 and only had to drill the holes in tunnel , for front bolts .The hole are there in the double plate but its not drilled out in the tunnel. The holes you need to drill out are alittle farther foward and a little up on a zl.
 
1 - 2 of 2 Posts
Top