Arctic Chat : Arctic Cat Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-17 of 39 Results
  1. Z/ZL/ZR/ZRT/T-Cat/EXT/JAG/Cougar
    Last season I blew out one of my driveshaft bearings and made it my project this summer to replace it because how hard could it be. Well long story short I'm in way over my head. I did eventually get everything apart and the bearing changed on the shaft but now I'm struggling. It took me way too...
  2. Arctic Cat Snowmobiles
    I have a lift kit on my 78 jag all it basically is is just flat bar to extend where the skid frame goes I’m thinking those need to be made stronger so they don’t shift or could it be something else?
  3. Arctic Cat Snowmobiles
    So the track for the 86 Jag is discontinued and while mine isnt bad, I would really hate for it to break and let go being how old it is. I don't want to be stranded on a long ride. What are my options, if any, for alternate or aftermarket tracks that will fit on my sled? I would like to find a...
  4. M Series/Mountain Cat Pre 2011
    Hey, so this is my first post in the forum. I'm looking at purchasing a 2006 M7 with the 162'' track and 2400km for $3500. I am fairly new to sledding and pretty light (160 lbs). Would this sled be to much? Will the longer track be a problem? He is currently running an attack 20 track, though...
  5. 4 Strokes
    Has anyone put a 1.5 inch lug track on a TZ1 LXR 1100? I want to upgrade my track but going to the 1.25 lug like the turbo uses just does not seem like a big enough difference.
  6. F/M/XF/ZR Procross Chassis 2012+
    Hey guys, looking at extending the stock 128 suspension to a 136 on my 2012 f1100. Dealer says they have done a few and no need for a tunnel extension. Would like to hear from anyone who has done one of these. If we like it we'd extend our f6 to a 136 also. Any thoughts? thanks guys
  7. F Series Twin Spar Chassis 07-20
    I have a 2006 1/2 F6 with the newer style '07 F body it has a 128x15x1" stock track on it. I recently bought a track off a guy on craigslist who said he had a 128x15x1.5" that he took off an '05 F7. The pictures look nice and with out doing my research or measuring the track i bought it. The...
  8. Z/ZL/ZR/ZRT/T-Cat/EXT/JAG/Cougar
    I was wanting to know if a 1 1/4" ripsaw would have enough clearance in the tunnel on my stock 96 EXT EFI deluxe , before I go putting it all back together and it does.n't fit an waste time. What track came on these stock back in 96?
  9. Vintage 1992 & Older
    I need a new track (or good used) for my 92 Lynx. From my research I believe the track specs are: 15" x 116" x .75" with 2.52 drive pitch. My question is ... will any track with those specs work on my sled, or are there other specs that need to be met?
  10. F/M/XF/ZR Procross Chassis 2012+
    How should I go about putting a longer track on an F800!? What would you guys do? I need a longer track for powder riding if its possible! THINK SNOW
  11. M Series/Mountain Cat Pre 2011
    Loaded my sled up on my truck today and noticed this little guy. Do you think this is Game Over for the track?
  12. General Snowmobile Discussion
    This could have been real bad. This is what My wife's bearing looked like when I went to switch out her track for a new one. I'm so glad we caught it! We take our sleds yearly for tune ups and once overs to the dealer and apparently they missed this! We didn't get really any ride time this year...
  13. Z/ZL/ZR/ZRT/T-Cat/EXT/JAG/Cougar
    Alright so i got the rear suspension out and im ready to get the track off. I know you have to take apart the chaincase (yes mine has reverse) and the secondary clutch and a few other things. im just looking for a more detailed discription on everything im going to incounter. looks like i have...
  14. Z/ZL/ZR/ZRT/T-Cat/EXT/JAG/Cougar
    Hi, im currently running a 2000 zr 500 with a 1 in track with ALOT of studs in it. I kind of want to get away from having a studded track (Due to restricted trails and chance of putting a stud through a cooler) so i was wondering what people think of either a cobra 1.3 sno pro track or a intense...
  15. Vintage 1992 & Older
    Hey everyone, just wondering if anyone knows a place to get a new reproduction track for a 71 puma and lynx or if anyone has had some luck making there own? I know you can still find used nos ones but most of the ones I find are so weather checked you don't know how long there gonna last. I...
  16. Z/ZL/ZR/ZRT/T-Cat/EXT/JAG/Cougar
    Does anybody know where I can find a kit or spacer which will allow the addition of a 4th rear idler wheel? This is my wife's machine and it only has 3 rear idlers. I would like to add another wheel inside the rails so the track has an extra guide wheel between the cogs. I have done a bunch...
  17. 4 Strokes
    I have a Z1 Turbo that has 1' track. What would be better to use, Studs or lug screws? Studs would cost me about $2.20 each, or I can get 14 lug screws for the same price. What size would be the best to use. Also, if I got a new track instead, what kind of track would be the best to get & lug...
1-17 of 39 Results
Top