Arctic Chat : Arctic Cat Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-18 of 38 Results
  1. General ATV Discussion
    Hello, First time poster. I have a 2010 arctic cat 450EFI and I am currently replacing the front and rear cv axles/bearings. Figured while I had the atv parked and tore down it would be a great time to upgrade the suspension to include new tires and wheels, as everything is currently stock...
  2. Z/ZL/ZR/ZRT/T-Cat/EXT/JAG/Cougar
    One of the local ski mountains turns a ski trail into a race up the mountain for sleds in a few weeks. My 98 EXT is all stock except for some upgraded shocks and springs up front. I’ve never raced a sled in any regard. What’s the best setup suspension wise for a heavier guy - 6’ 240 lbs.
  3. Firecat/Sabercat
    I have an 04 saber cat that I'm looking for a fox level replacement for my rear shock with coil over to replace the side coil spring. Are there any options?
  4. Z/ZL/ZR/ZRT/T-Cat/EXT/JAG/Cougar
    Hey guys, I got my hands on an 02 zl800ss I’ve been putting some work into it lately trying to bring it back to life. Pretty well got all the boxes checked off when it comes to the motor and clutching but! Rear shock is pretty well shot and needs replacement. Now I would like to get rid of the...
  5. Z/ZL/ZR/ZRT/T-Cat/EXT/JAG/Cougar
    I just bought a z440 with 1051 original miles for my daughter to cruise around. Sled is in pretty decent shape except for the corrosion on the front suspension. Bushings will be replaced and I'm going to pull it all apart and clean it up the best I can. It all looks mostly like surface rust, but...
  6. Vendor Spotlight! Great Deals for Members
    Hello, I am offering UHMW bushings to replace the OEM rubber bushings on your bikes suspension. UHMW is a hard plastic that will last much longer than the rubber ones you can buy. These bushings are turned on a CNC lathe and are made to be a tight fit. They may need to be tapped into place or...
  7. Utility ATV repair, maintenance, troubleshooting
    Hello, I am offering UHMW bushings to replace the OEM rubber bushings on your bikes suspension. UHMW is a hard plastic that will last much longer than the rubber ones you can buy. These bushings are turned on a CNC lathe and are made to be a tight fit. They may need to be tapped into place or...
  8. M Series/Mountain Cat Pre 2011
    So, I just picked up an 2011 m8 snopro with alternative impact aarms. Ski stance is like something out of a horror movie (see pictures). It says on Alternative Impacts website that when installing aarms one should also change shocks to (I assume?) shorter ones since arms are shorter. Could not...
  9. General ATV Discussion
    Hello all Looking for some input from the community regarding shocks for my 07 650 h1. The originals are still in there, and the machine has 800 hours on it. The suspension feels poor, but it’s my first quad I’ve ever owned so not sure if I should be replacing them at this point? Thanks in...
  10. General ATV Discussion
    Hello all, this is my first post on the site. I recently picked up a 2002 500 4x4 automatic with the solid rear axle. I got it for cheap but it needs a good amount of work. One of the big things I am trying to fix is the suspension. The front shocks are blown, the rears are alright but Id still...
  11. F Series Twin Spar Chassis 07-20
    Hi guys I have a 2010 F8 and the skid front shock blew apart and bushing hole is worn severely. I just bought the sled so it’s not lack of maintenance on my part. The struggle is I can’t get a new shock from cat. Unavailable. It’s really such BS that they can do this. Anyone have any ideas on...
  12. M Series/Mountain Cat Pre 2011
    Looking at doing some upgrading/losing weight for my wife’s M6. Running great, 120psi on both. Skinz aftermarket hood installed. 2 day trip to the mountains complete recently and not a single hiccup from the machine. She complained about rough ride and no reverse lol so focusing first on...
  13. Utility ATV repair, maintenance, troubleshooting
    Hey guys! I'm thinking about using the Fox Float Evol 3 R in my rear suspension. But before it i would like to know if you guys could help me out with some doubts. First of all, how often i have to do maintenance at those shocks? Are they durable or break often? How about the cost of the...
  14. Z/ZL/ZR/ZRT/T-Cat/EXT/JAG/Cougar
    Hello, I am new to this site and I haven't had a sled since I was a little kid. I just bought a 1995 ZR580 with a Wildcat 700 engine. I have been researching the AGLT mod for the front suspension which I will be doing. I have researched the rear suspension mod using 1997 and up rear skids as...
  15. Z/ZL/ZR/ZRT/T-Cat/EXT/JAG/Cougar
    i just got my 93 ext in my garage to rebuild and was noticing the lack of suspension, if anyone knows a way to ajust the rear to sit higher it would be much appriciated.
  16. Firecat/Sabercat
    After banging through a lot of big drifts yesterday I got home and noticed my sled was sitting very low, I lift it up and it drops a little and stays but if you push down there is no rebound at all, I'm assuming my shock is toast but am I wrong? Also this may seem like a dumb question but should...
  17. Firecat/Sabercat
    ok guys i bought a 03 f5 firecat a litttle less than a month ago and i would like to lift the rear end of it to make it sit more agressive so if there is anything i can do with the stock suspension let me know thanks
  18. Z/ZL/ZR/ZRT/T-Cat/EXT/JAG/Cougar
    I have an 03 zr 800 efi that has been a suspension hell. I just had my shocks rebuilt and put new stock springs on. I ordered the stock spring sleeves as well. When I went to put them on, they fit over the axle good but there seemed to be a lot of space between said sleeve and spring. I...
1-18 of 38 Results
Top