Arctic Chat : Arctic Cat Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-17 of 19 Results
  1. General ATV Discussion
    So I was riding and the battery got bumped loose and caused the Atv to turn off so I fixed it turned it on and it would no longer go into reverse the reverse light works but doesn’t go into gear.
  2. Arctic Cat Snowmobiles
    When i hit my reverse button it about 50 percent of the time it will shift in and out perfectly fine. The other 50 percent it will only work if i repeatedly press the button. But the ccu with a wrench come on everytime regardless of wether or not it shifted. Any suggestions would be appreciated...
  3. F/M/XF/ZR Procross Chassis 2012+
    I have a 2016 m800 Arctic Cat and while going slow or at low idle it will go into reverse on its own. I tried cutting the wires to the reverse button and it still dose it any ideas?
  4. Utility Performance / Technical info
    I had another post back in 21 seeking help on this issue: https://www.arcticchat.com/threads/no-reverse-or-high-range.500114/#post-3728591 I have a 2006 400 4x4 manual shift. i was recently navigating my way through the woods. Parked and came back, went to shift into reverse and all it would...
  5. Arctic Cat Snowmobiles
    We are getting back into sleds and just bought a '13 M1100 Turbo Pro Climb, needless to say 2nd day out, broke reverse. got it home and the "reverse shaft" Part No. 2602-277, is sheared off. Just wondering if anyone has gone through this, and how to get the rest of it out? the stuck piece spins...
  6. Firecat/Sabercat
    I got a 06 f7R the sled goes into reverse fine, but sometimes you have to push the reverse in and out once to get her to engage forwards again the linkage seems very sloppy, can’t find much online any info appreciated!
  7. 4 Strokes
    I need a reverse Actuator for my sled but they are not available through Arctic Cat any more. Original part number: 7999-272 Replacement: 0630-221 Neither are available, I've even checked salvage yards. Does anyone know if these can be rebuilt and if so, who could do it?? Any help...
  8. M Series/Mountain Cat Pre 2011
    Looking at doing some upgrading/losing weight for my wife’s M6. Running great, 120psi on both. Skinz aftermarket hood installed. 2 day trip to the mountains complete recently and not a single hiccup from the machine. She complained about rough ride and no reverse lol so focusing first on...
  9. Vintage 1992 & Older
    Hello all, I am new to this forum and need some help. I have a really nice 93 Prowler and I need a new decal for the one side of the hood (so it has to look exactly like the factory original) I also want to add reverse to this rig as I am tired of pulling it out of my garage, lol I have someone...
  10. Arctic Cat Snowmobiles
    Bought a 09 m1000 used. When i put it in reverse the secondary clutch opens up without moving the sled. WHY? Put it back into forward the clutch only closes if i roll it forward. Need to know whats broken so I can fix. Does someone know what causes this issue.
  11. Panther/Pantera/T570/Touring
    Hey! I just replaced the driveshaft bearing in my 1996 Pantera (EFI w/ Reverse).With the track off the ground, I set it to forward, and pressed the throttle and it worked without an issue! No weird sounds or anything. When I put it in reverse, it almost sounds like something is grinding or...
  12. 4 Strokes
    I have a 2009 TZ1. When I push the button for reverse, the wrench icon lights up, and the display reads “CCU”. It had the recall unit replaced just about 300 miles ago. Any suggestions?
  13. CrossFire/CF/CFR 06-11
    Alright, so I have a 2006 crossfire 700 with a 136 and a worn down 1.25 inch lug track. I purchased a 144 x 2 inch track at the end of last year and I'm itching to put it on, the only thing stopping me is the gearing. I believe the crossfire diamond drive comes with 60/60 gears, and I think I...
  14. CrossFire/CF/CFR 06-11
    I just bought a 2009 Crossfire 1000 that has electronic reverse. When I put it in reverse and slowly accelerate there is a clunk sound. When I go back to forward it does the same thing. It only does this once and goes forward and backward just fine. Is this sound normal?
  15. Z/ZL/ZR/ZRT/T-Cat/EXT/JAG/Cougar
    I got the cover off my chaincase And to get the chain tensioner off it says i need to replace the screw with a set screw and tighten it down then turn with a 3/4 wrench. Easy enough but i dont have a set screw. Is there away around this where i dont need the set screw? I dunno
  16. F Series Twin Spar Chassis 07-20
    While driving the other day, the belt snapped on my sled, 07 f1000. After we put a new belt on, the reverse beep was on and off both in reverse and drive. Initially, if I switched it back and forth, the beeping would stop. The engine light would flash when I switched it at first, but nit...
  17. Panther/Pantera/T570/Touring
    Sled is new to me. Just took off the case cover to see how it looked. All looked good. But, can't figure out how to get the cover back on with the reverse fork in the correct position amongst the gears. It came straight off easy....is there a trick to putting this back together? Do I need to...
1-17 of 19 Results
Top