Arctic Chat : Arctic Cat Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-17 of 23 Results
  1. Arctic Cat Snowmobiles
    Hello! Brand new to the forum. I just picked up a 2001 mountain cat 1000. Sled has 246 hours on it but has spent its whole life outside. I have started to go through this whole sled. The air box silencer boot is torn and no longer available anywhere (believe me I spent days looking). I’ve done a...
  2. Arctic Cat Snowmobiles
    Hello I was wondering if anyone knows, Will a 2004 ZR 900 EFI motor fit into my 2002 800 mountain cat? The 800 has broke crank and bearings, sounds like engine is full of metal. Wanted to keep the machine and found the 900, figured why not upgrade it. Any ideas are welcome. Thanks
  3. Arctic Cat Snowmobiles
    I saw a post from 2010 (sierra5) had the exact same issue as me. Broken Drive Shaft on the exact same year, make and model. Seems like there was an issue with these (maybe why they are so hard to find) I am going to attempt to remove the broken shaft myself, take the broken parts and the new...
  4. Z/ZL/ZR/ZRT/T-Cat/EXT/JAG/Cougar
    Just bought myself a zr800 for a fun cheap and reliable sled, but in order to keep up with friends and family on new sleds i might have to extend the track length... What is the best way to extend a zr800? does a mountain/king cat boogie fit on a zr chassis? look the same from distance but Im...
  5. M Series/Mountain Cat Pre 2011
    Looking for first actions on trouble shooting a problem i ran in to. Every thing was running fine, but i had it into the garage replacing my slides and bearings on my idler wheels. Then when i went to drive it home i was going about 20 or 30 MPH and i noticed my speedometer wasn't working, so i...
  6. Z/ZL/ZR/ZRT/T-Cat/EXT/JAG/Cougar
    hello folks, my grandfather has an ext 580 efi Mountain Cat and so far nothing but problems. the sled is in mint shape but endless problems with fuel system. he will work at it untill he can figure it out and i was hoping if a you guys could help speed up his work time. ok so heres the problems...
  7. M Series/Mountain Cat Pre 2011
    What type of riser is best for an 01 mountain cat? Powermadd and sled solutions both have some that say they would work. I like the Powermadd ones but do I need the Pivot Adapter? Anyone have risers on their sled that has a suggestion? I am looking for 3-5" Thanks
  8. M Series/Mountain Cat Pre 2011
    I have a 2002 Mountain Cat 600EFI, I got it last season and it ran great. at the very end of last season the sled died on me in mid powder turn. The sled would turn on but as soon as you put enough throttle on the machine to move it, it would die again. after a couple hours of this i got it to...
  9. M Series/Mountain Cat Pre 2011
    Hi All, I have a 2002 Arctic Cat Mountain cat 600 efi that I recently purchased here in Steamboat Springs, Colorado (6,700ft). It starts great on the second pull and idles forever. On my first outing on it, it presented a couple of issues. First, we took it up on Buffalo Pass(10,000ft) and...
  10. M Series/Mountain Cat Pre 2011
    I have a 900 efi motor that I am sticking in my sled and bought a clutch to go with it, the 33mm 6 tower clutch that goes with it. I bought it from a private seller through a swap meet, and he said it was a "perfect" "mint" clutch. when I received it and cleaned it up, it turns out on the...
  11. M Series/Mountain Cat Pre 2011
    Hey everyone, I recently picked up a 2001 Arctic Cat 800 Mountain Cat with an extended track to 153" and a few other mods. I took it out for a ride the other day and it ran great until the end. after about 3 hours of riding I started to slightly smell burned rubber when I stopped. It was...
  12. M Series/Mountain Cat Pre 2011
    I have a 2002 arctic cat mountain cat 800 carb with about 2500 miles. And I was wondering why everytime i start her up after sitting for a while (like a day or more) she has a really bad bog at high Rpms and it doesn't go away till I scream it out. Like gun it till the rpms finally go up and...
  13. Z/ZL/ZR/ZRT/T-Cat/EXT/JAG/Cougar
    Does anyone have the M-series conversion hood for King Cat/1M for sale??? Or a t660 hood that would fit a mtn cat?
  14. M Series/Mountain Cat Pre 2011
    I have a 2003 mountain cat 800 efi and it is dumping fuel and oil into one of the cylinders. I recently had the servomotor replaced due to the bogging prroblem, but that did not solve the problem. any suggestions onn what could be the problem? Thanks
  15. M Series/Mountain Cat Pre 2011
    Hey, I have a 2002 mountain cat 800 that i'v been getting a bad bog. the bog is bad when i try to pin it. I had always been putting 87 octane gas in it untill this weekend when i put 91 octane in it. I also had just switched over to using the APV oil. The bog started right after this. would...
  16. M Series/Mountain Cat Pre 2011
    Well rebuilt it for the fourth time now. 4 previous builds eroded the top of the piston. so put bigger jets in. I believe it solved the problem. So started it up and checked everything. sprayed carb cleaner EVERYWHERE on the engine. It didnt leak. So I think good must be fixed. get about a 1/4...
  17. Vintage 1992 & Older
    Just picked up a 1990 mountain with a 1991 parts sled, the mountain prowler has a seat that's torn to shreds, and for the life of me, I can't figure out how that damn seat comes off. I'm not strong enough to get it on it's side to have a look under the tunnel for bolts, but if I can find out...
1-17 of 23 Results
Top