Arctic Chat : Arctic Cat Forum banner
clutching
1-20 of 27 Results
  1. M Series/Mountain Cat Pre 2011
    New to the forum so bare with me I have a 2009 m1000 with a 153, running close to sea level at all times and I plan on putting some d&d twins. also picked up a boondocker box I got of an 07 m8(assume and was told it worked) to put on as well. I heard good and bad about the twins but decided to...
  2. F/M/XF/ZR Procross Chassis 2012+
    I have been thinking about putting a clutch kit on my 2017 ZR8000, 129”. Sled is stock. I have been looking at Speedwerx and Bikeman Stage 2 kits. Both sound good and priced about the same. But there are not many reviews out there talking about them. Looking for recommendations, not just...
  3. Performance/Racing
    i have a 2003 f7 firecat with speedwerx mild ported cylinders, jaws twin pipes, exhaust/power valve delete kit from BDX, bulls eye intakes, boondocker control box and 3 window digatron on the sled and i have a 2.5 degree timing key that need to be installed. I have not touched anything with the...
  4. Z/ZL/ZR/ZRT/T-Cat/EXT/JAG/Cougar
    I have a 02' Z 570, and I have taken and replaced the secondary spring from a stock yellow, to a red sping and tightend the tension on it. My quesition is... What else can I do to my clutching, primary or secondary, to get more speed?
  5. Firecat/Sabercat
    I recently bought another 2003 f7. I was going across a field and a 5" chunk of my primary broke off. It had revved and went good with that clutch. Then I put an 04 f7 clutch on it that originally had a gold spring, I put my yellow spring it that had been in the original clutch. Now it jumps up...
  6. CrossFire/CF/CFR 06-11
    newbie any advice for searching specific problems
  7. Z/ZL/ZR/ZRT/T-Cat/EXT/JAG/Cougar
    Here is my current setup. 2000 ZR Sno Pro Chassis 2001 Non-Power Valve with carbs ZR 600 Motor Twin Black Magic Pipes 20/39 gearing 52.9g weights Orange/Black Arctic Cat primary spring 143/290 Purple/White Black Magic secondary spring which is a little lighter than the red/white arctic cat...
  8. General Snowmobile Discussion
    Was out riding in Idaho/Montana and I had a problem with the secondary. When you are at a dead stop and hit the accelerator it makes a really bad sound and hardly moves. Sorta sounds like a grinding scratching skipping noise, just bad. So I bought a used clutch and put the original helix and...
  9. F Series Twin Spar Chassis 07-20
    I have a 2003 f7 this is my first sled. growing up my dad had sleds but this is the first one i bought I LOVE IT, Last year i got a mechanic friend of mine to show me how to rebuild clutches and since buying the sled i have learned alot about it because It seems there is always something...
  10. Proclimb M/Ascender/Alpha One 2012+
    I recently purchased an 2012 m1100 turbo sno pro with the 162 track. I have installed a boondocker ez jacker 1.9 and mbrp muffler on it. The thing is a monster of a sled but the max rpms are 8200 to 8300. I have been looking at some speedwerx clutch kits and I was not sure if I should just get a...
  11. M Series/Mountain Cat Pre 2011
    Hey guys, So i put on a new clutch after discovering my bushings/rollers were pretty well shot. After I got the new clutch in i am getting a REALLY low engagement (2800 - 2900). I am running the Gold 0646-376 (75 lb 275 lb ) What would be a good spring to get my engagement up? I am...
  12. Z/ZL/ZR/ZRT/T-Cat/EXT/JAG/Cougar
    Well, I know I have had similar posts in the past but, just kinda wondering if anybody else has any ideas or if anybody has figured any new tricks out. I was trying to talk my wife into letting me get a new cat because my ZR500 just doesnt seem to have the...go...for me anymore. I have been...
  13. Utility Performance / Technical info
    Hey guys...got a 07 500 auto...it seems it doesn't down shift right away when coming out of a corner, it just bogs down....just wondering if weights would solve the problem instead of buying a whole clutch kit? If so what kind....help would greatly be appreciated....
  14. Firecat/Sabercat
    my 03 f7 snopro, extended to 144" with 1.5" paddles stock clutches, engages at about 3600-3700 rpm, want a little bit more snap to it to keep up with my buddies f6 mod off the line, thinking about a stiffer spring and lighter weights to get it to fully rev out as its only hitting 7800 w/o, any...
  15. Z/ZL/ZR/ZRT/T-Cat/EXT/JAG/Cougar
    This is for my Zr 800 with a bm single and matchinng can. Anyone know a good primary spring that will compliment the 81g big dog weights . I Currently have a black/purple spring which I think is 168/312. My sled engages maybe 3400 and only revs out to like 6300. I'm trying to get between...
  16. M Series/Mountain Cat Pre 2011
    Hey, i just bought an 05 M7 that is all stock with a 153" attack 20 track. I just bought some Cutler IT adjustable weights and was wondering if anybody knows or has seen any elevation charts for the M7. I need to know how much to load up the weights for each elevation. At home i am at about 1600...
  17. Z/ZL/ZR/ZRT/T-Cat/EXT/JAG/Cougar
    Hey everyone I'm brand new to this site and I really enjoy it, I have a 01 zr 800 and It really pulls on both river and trail but I'm just curious about my clutching as the previous owner did it, I have an orange primary and a dnd 800tx gold helix and gray secondary spring. I also have a power...
  18. F/M/XF/ZR Procross Chassis 2012+
    Hey Guys, I have never done any clutching modifications on my sleds from stock before. Got the new XF800 SP and was entertaining some mods. What do you guys recommend for clutch mods for this sled. I am willing to give up some top end to get extra hit on the bottom. I'm a fairly agressive...
  19. CrossFire/CF/CFR 06-11
    So iv got a 2010 crf800 snopro and it dose over 100mh right now and it's still pretty good out of the hole but I sorta want a lil bit more off the start and it won't hurt my feelings any to lose 8 or 10 mh off my top end and I was sorta thinking about changing my gears on the dd or should I be...
  20. Z/ZL/ZR/ZRT/T-Cat/EXT/JAG/Cougar
    I aquired the sled this winter. I rebuilt the top end, I inspected the jugs and they were nice, no gashes or visible marks, and it is said that no honing is required and the rings will seat themselves. Well I have been riding it quite a bit and it has 105 on the pto cyl and 100 on the stator...
1-20 of 27 Results
Top