Arctic Chat : Arctic Cat Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

21-36 of 90 Results
  1. General Snowmobile Discussion
    im having severe issues getting the clutch off of my 1994 ext 580 efi i have the clutch puller threaded in but the clutch will not realese also i am wonder what is the best way to to the primary from spinning while threading the clutch puller? any suggestions
  2. Z/ZL/ZR/ZRT/T-Cat/EXT/JAG/Cougar
    hey guys. went out for another ride the other day and every time i tried holding it wide open there would be a loud bang coming from the secondary clutch. and i noticed that there is about a quarter inch gap between the bolt that holds the secondary clutch on and the clutch itself. i have no...
  3. Vintage 1992 & Older
    I have been slowly chasing some issues with my Wildcat and I am looking for a little more help to get it tuned in just right. I will try to keep the descriptions to a manageable length. Issue 1 After the post purchase cleaning of the carbs, I was running rich in the mag side carb. We...
  4. General Snowmobile Discussion
    Was out riding in Idaho/Montana and I had a problem with the secondary. When you are at a dead stop and hit the accelerator it makes a really bad sound and hardly moves. Sorta sounds like a grinding scratching skipping noise, just bad. So I bought a used clutch and put the original helix and...
  5. Z/ZL/ZR/ZRT/T-Cat/EXT/JAG/Cougar
    Hey guys. I got a 94 zr 580 carb. And I keep hearing a sort of ticking noise near the primary clutch (comet 6 tower) and the ticking goes faster as the clutch turns faster. I'm kinda worried I might need it to be rebuilt. Any suggestions on what it could really be? Thanks
  6. General Snowmobile Discussion
    Hi all users of this forum. I am new to this, but I would like to ask you for some help. I am looking to buy a new clutch for my pretty old scooter. My current clutch is fitted with a green spring and 49.5 gram arms. The seller actually recommends to add 2 more grams to the new model of clutch...
  7. Vintage 1992 & Older
    I am working on my Panther again. I need advice on what kind of clutch this is and how to remove it. I have another string started called 1967 Panther, but I think this might be better separated so others who might later search for an answer to this question won't have to wade through a long...
  8. Z/ZL/ZR/ZRT/T-Cat/EXT/JAG/Cougar
    I have a 98 zr 500 and the old clutch that was on it was gabage it had crazies throught and the weights dug right into the sides, so I bought a new clutch just a powerblock 50 from royal distributing I just put it on today took it for a ride and noticed a delay on the take off when I punch it it...
  9. Firecat/Sabercat
    Hey folks, Looking to get some advice clutch maint., rebuild schedules. I've been searching around a bit and haven't really found a clear answer to when these two things should be done, what all is required (tools/parts), and if it is simple enough for a fairly handy guy or girl to do...
  10. F Series Twin Spar Chassis 07-20
    today while riding i hit the break and the motor stalled so i did it again the then the primary clutch got stuck looks like one roller is feed in the a and now the weight is stuck. so as far as i now you cannot replace the rollers but i have a buddy with a new style 2009 crossfire 800 clutch and...
  11. Z/ZL/ZR/ZRT/T-Cat/EXT/JAG/Cougar
    So, I talked to some "clutching experts" at (blank) performance and asked them what they would reccomend for a clutch setup for my sled. I just got my new top end and computer for the ZR500 to go to a 600. I know how to do engine rebuilds and I know how to tear apart a clutch and put it back...
  12. Vintage 1992 & Older
    got a 81 lynx for $20 some years back at a swapmeet that didn't run & had a huge hole in the hood,no windshield,no ign switch,etc...well she's a whole new sled now,doesn't even look like a lynx,took all the pink off & put the arctic cat green on her....bought this sled for my kids to smash up...
  13. M Series/Mountain Cat Pre 2011
    Hi All, I have a 2002 Arctic Cat Mountain cat 600 efi that I recently purchased here in Steamboat Springs, Colorado (6,700ft). It starts great on the second pull and idles forever. On my first outing on it, it presented a couple of issues. First, we took it up on Buffalo Pass(10,000ft) and...
  14. M Series/Mountain Cat Pre 2011
    i just put a bmp stage 2 clutch kit with super tip weights set at 78g and torsion conversion kit. it doesn't engage until around 5500-6000 just wondering if anybody eles has put this kit on and how did you set it up or if anybody knows the best set up to start.
  15. General Snowmobile Discussion
    Hi, Im new here and am looking for some assistance in troubleshooting a problem with me mountain cat 900. The recoil was slipping and then wouldnt retract on my last ride. I had to start manually via the clutch. When the engine started the recoil retracted and broke. I replaced the recoil...
  16. F/M/XF/ZR Procross Chassis 2012+
    I have a 2012 xf 800 SNO PRO high country and I was wondering since I have been to Cook city several times and i know that you can ride from 8000 to 11000 feet. What weights should I buy for my sled? arctic only makes 0 to 5000 ..... 5001 to 9999....10000+? well this is unfortunate because...
21-36 of 90 Results
Top