Arctic Chat : Arctic Cat Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 95 Results
  1. Z/ZL/ZR/ZRT/T-Cat/EXT/JAG/Cougar
    Hello! The clutch on my 2001 ZL 550 wore out and needs to be replaced. I have a COMET clutch off of a 1995 ZR 580. Will it work? Both are 30 mm tapers. Will I need to shim the secondary? And do I need to change out the spring and weights on the COMET clutch to what is currently on the ZL 550...
  2. Performance/Racing
    Hey does anyone know if a standard EPI Spring will fit a powerbloc 80 clutch? if not is there a place where i can find one? I have a 04 ZR 900 efi that I want to drag and its engaging at 2500 RPM. I would like it to engage around 3500-4000 RPM
  3. Arctic Cat Snowmobiles
    Hey everyone! Just bought a new to me and first sled this winter! It's a 2011 crossfire 800 it only has 1400 kms on it. And I'm the third owner So I was checking my belt the other day and noticed that it is really starting to wreck the inside of the panel that covers the clutches in. Theres so...
  4. Z/ZL/ZR/ZRT/T-Cat/EXT/JAG/Cougar
    I have a 98 zl 440. When I give it throttle it will twitch forward about an inch then just stop. I think it is the clutch, but I have no clue what one it how to fix it. If anyone can help I would appreciate it. TIA
  5. Arctic Cat Snowmobiles
    So I’ve got a 06 crossfire 700, I’ve been going through the clutches, I found out my primary is off of a 03 f7, it had 66 gram weights with a orange spring if that makes a difference, and on my secondary it says it’s a 44/40 and it has a green spring, does anyone know if that setup with work...
  6. General ATV Discussion
    Any help would be appreciated. my arctic cat 4x4 500 is having problems with its clutch. My quad is revving super high and loud and barely moving. The primary is spinning, opening, and closing at top rpm. No power at all. Quad has 27" tires and a speedwerx clutch kit. Thing ran great and was a...
  7. Wildcat XX
    Dialing in the clutching on my turbo build. My overall goal with this is build was a crazy fast out of the hole wheelie machine. Im making more than enough power to do it, just cant seem to get the clutch right. I would PREFER to be able to make this happen without having to go to Tapp clutch...
  8. Bearcat/Norseman/Utility
    I was surprised to find out the Norseman 6000 comes with 19:50 gears (2.63:1) from the factory. I do a lot of flat land, long distances with pretty light towing loads (~200lbs at most). I don't really need it to be geared quite so low. Crossing long lakes has me WOT and barely making 120km/h...
  9. Arctic Cat Snowmobiles
    Was riding my sled (06 Crossfire 600) a couple weekends ago and heard a pop while going full throttle across a lake. Afterwards I started getting a grinding or rattling noise when taking off from a dead stop. I popped the hood when I got home and found the whole outer layer of the belt was...
  10. Arctic Cat Snowmobiles
    My primary on my 1978 jag engages sloppy what could course this and what could I check when it’s disassembled
  11. Z/ZL/ZR/ZRT/T-Cat/EXT/JAG/Cougar
    I have a 1998 ZL500 that is in great shape. It had been taken care of very well over the years. It starts up on first or second pull and everything seems great but I had it in for service and had them look it over and do a leak down test. They are recommending to replace the clutch and...
  12. F/M/XF/ZR Procross Chassis 2012+
    Hey guys, I just picked up a 2013 F800 LXR and the surface of the primary clutch is grooved/worn so....time for an upgrade? I've been trying to google/find info on aftermarket clutches but it doesn't look like the exist/if they do they aren't worth it unless you are racing. What is everyone's...
  13. General ATV Discussion
    So my 550 developed a clicking/clunking sound from the clutch area. I first notice it while driving fwd or reverse. I put it on stands and left it in neutral, reved engine and you can hear it slightly. If i turn the driveshaft a bit it will make the clicking/clunking sound, i turn it again it...
  14. General ATV Discussion
    Hey all, so my cat seems like I have to really rev it up for it to start moving. It drives fine once it’s moving, can usually get it to 85km/h or so. Its good in the mud and water. So what I’ve done so far is, new wet clutch, machined housing, new belt, removed one way bearing, new pads, new...
  15. Z/ZL/ZR/ZRT/T-Cat/EXT/JAG/Cougar
    Any idea on how to get it apart now?
  16. Arctic Cat Snowmobiles
    Bought a 09 m1000 used. When i put it in reverse the secondary clutch opens up without moving the sled. WHY? Put it back into forward the clutch only closes if i roll it forward. Need to know whats broken so I can fix. Does someone know what causes this issue.
  17. Arctic Cat News
    I sent my clutches to airdam clutches 6weeks ago. Ups says they recieved my parts but last contact with them they said lost my clutches now its been 1week later and they ignoring me no response What do i do ???
  18. Utility ATV repair, maintenance, troubleshooting
    Picked up a 01 auto the other day. I can tell the belt is slipping just from lack of power. Popped the cover and found that a new belt had been put on. The faces that move and drive the belt are glass smooth and have a pretty bad ridge in them towards the top. The clutches themselves dont have...
  19. F/M/XF/ZR Procross Chassis 2012+
    I have been thinking about putting a clutch kit on my 2017 ZR8000, 129”. Sled is stock. I have been looking at Speedwerx and Bikeman Stage 2 kits. Both sound good and priced about the same. But there are not many reviews out there talking about them. Looking for recommendations, not just...
  20. F/M/XF/ZR Procross Chassis 2012+
    Can I update my 2015 ZR 8000 LXR to the 2016 Team primary without updating my secondary? Would it just entail the correct weights and spring?
1-20 of 95 Results
Top