Arctic Chat : Arctic Cat Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-12 of 13 Results
  1. Utility ATV repair, maintenance, troubleshooting
    I just purchased a 2002 AC 300 4x4 (green). It is in fairly good shape, with less than 800 miles on it. I've ran into carb problems, but have an aftermarket carb on the way. The main issue I've run into is the braking system. I've read that the foot brake doesn't work well, but would like a...
  2. Z/ZL/ZR/ZRT/T-Cat/EXT/JAG/Cougar
    Recently accuired this 94 zr 580 and it needs brake work and i have a few question. 1. If the break lever is "stuck" is that the master cylinder? 2. I belive the caliper is seized up, is it worth rebuilding or should i replace it? 3 if i should replace the caliper, will later year zr 580...
  3. Utility ATV repair, maintenance, troubleshooting
    What are the best brake pads for 06 Arctic cat 400 4x4? I ordered a set but they ran out of brake pad after just a few days of riding. At this point I’ll pay for what I need. Just want something to last.
  4. Z/ZL/ZR/ZRT/T-Cat/EXT/JAG/Cougar
    I bought this sled last year pretty cheap. It is only my second sled but I had a blast with it and never want to get rid of it. I had to put a clutch and head gasket in it. rode great until my last ride of the season. My brake caliper started sticking. I can not seem to find a caliper or rebuild...
  5. Utility ATV repair, maintenance, troubleshooting
    Hi Guys, new to the forums here. The front right brake line going to the wheel was rubbing up against the wheel, and eventually started to leak. I am looking to fix this to get the brakes working again. Back brakes currently still work so atleast I have something for now... I am not the most...
  6. Utility ATV repair, maintenance, troubleshooting
    Hi All, Was wondering if anybody knew the size of the brake bleeder screw/valve used on Arctic Cat ATV's? (09 TRV 1000) Thinking about replacing mine with those speedbleeder valves, the ones with the check valve built in, since bleeding brakes on theses atv's can be such a pain. Checked...
  7. Utility ATV repair, maintenance, troubleshooting
    Hello, I purchased a '96 bearcat from a gent on CL. When I bought it it had no brakes, missing the front Master cylinder and the front calipers. I just bought all the parts and started hooking everything up.. My questions is there is this little rubber/plastic line that looks like it attached...
  8. Utility ATV repair, maintenance, troubleshooting
    I have had my mud pro since it was new and i've had it for just under 2 yrs and am on my 5th set of brake pads. 1 factory set 2 sets of ebc severe duty brake pads and 2 sets of volar severe duty Kevlar pads. one set lasted one ride! I was going through right rears a little quicker so I changed...
  9. Utility Performance / Technical info
    I moved my rear brake rotor and caliper to the inside of the frame to protect it and to make some room for rear spindles for future rear steer setup. I didn't know how well the new brake location would work but upon testing it out, I found it works way better than the factory location. I could...
  10. Utility ATV repair, maintenance, troubleshooting
    How do I adjust the back brakes a little tighter on my son's 90? They just seem not to be quite tight enough for my comfort.
  11. Vintage 1992 & Older
    Hi folks, I hae a 73 Cheetah I inherited from my Dad The thing is great, runs awesome and has been well taken care of , he used it to tow a bob house onto the ice for fishing, so it has the Metal ice track on it. Its a 440 Kawasaki engine. So its real fast, im sure you all are laughing right...
  12. General ATV Discussion
    2001 arctic cat 400 2x4 master cylinder piston stuck. Has anyone had this problem before and know how to fix it or is there a more common master cylinder that I can use to replace it with off of another bike? I just bought it, first atv, full of problems, missing bolts, broke plastics, no...
1-12 of 13 Results
Top