Arctic Chat : Arctic Cat Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-13 of 13 Results
  1. Z/ZL/ZR/ZRT/T-Cat/EXT/JAG/Cougar
    2005 Z570 The lower bearing within my chain case gave out, and luckily I didn't discover damage to any other components. I decided to order all 4 bearing related to the drive train; both inside the chain case, the bearing at the secondary clutch and the bearing opposite the chain case (below...
  2. Utility ATV repair, maintenance, troubleshooting
    I just acquired a 2006 650 v2 via trade. Cat happyI traded a smoking and knocking wolverine 350 for it. The v2 supposedly just needs rod bearings and put back together.:Bangin: the guy I got it from said that the rod bearings could be replaced without splitting the cases. my question is what...
  3. CrossFire/CF/CFR 06-11
    A few weekends ago the bearings at the brake side broke. So i bought new bearings, and dissasembled most of the snowmobile. But here's the problem, the drive shaft is now stuck to the diamond drive. Do anybody here got any advise how to get the shaft to part from the diamond drive? I have tried...
  4. General Snowmobile Discussion
    This could have been real bad. This is what My wife's bearing looked like when I went to switch out her track for a new one. I'm so glad we caught it! We take our sleds yearly for tune ups and once overs to the dealer and apparently they missed this! We didn't get really any ride time this year...
  5. Z/ZL/ZR/ZRT/T-Cat/EXT/JAG/Cougar
    Got my new bearings for my jackshaft and driveshaft. Im putting my jackshaft back in and i wanted to know if i needed to grease or pack grease into the clutch side bearing. If i do should i use low temp grease or wheel bearing grease? Both bearings on the right side dont need grease because they...
  6. Z/ZL/ZR/ZRT/T-Cat/EXT/JAG/Cougar
    Finally got the driveshaft out, I checked the bearings and they sound kinda crusty, so im going to replace them. The one bearing on the chaincase side sliped off eazy but has a weird irregular groove in it i wanted to know if this is normal or not. And ive been trying to get the lock collar off...
  7. Z/ZL/ZR/ZRT/T-Cat/EXT/JAG/Cougar
    Hey guys just tore my sled down 2001 ZR 800 w/ 883 preditor kit. to replace the drive shaft bearing clutch side was so bad the old locking collar and what was left of the bearing were ceased on so I had to take the whole shaft out to get it off (effing never again) anyway now that I'm all set to...
  8. Utility ATV repair, maintenance, troubleshooting
    Has anyone had issues with a clutch nut backing off by itself? I have a '07 650H1 and mine has done this four times now. It is a stock machine and I have taken it to three different shops to fix this now. It only last about 15 miles max. Could a bad bearing or clutch cause this?
  9. Firecat/Sabercat
    Hey guys, I have a 2004 Sabercat 700. I was riding doing about 50 mph, and all of a sudden I heard a clunk and the power just drained right out from underneath me. I came to a stop and when i tried to hit the throttle the engine just rev up to 3500-4000 RPM and wouldn't move. I...
  10. Utility Performance / Technical info
    I have an arctic cat 400 auto, when I slow down in reverse or turn sometimes it popss and annoys me. I think its the driveshaft, but I'm not sure. If it is what goes bad in them to make it do this? Bearings? Also my front left brake is dragging and I can't fix it. Should I try bleeding it? I'm...
  11. Firecat/Sabercat
    hey all! was hoping to get a second opinion (or third and fourth...)on some issues with my 04 F7 efi. was out riding yesterday and started to notice some screechy growling noises, stopped and investigated. took off driven clutch (thought it was loose) & changed the belt, just to see. noise went...
  12. General Snowmobile Discussion
    hey i changed all of the bearings on the drive shaft and fixed the speedo everything was good but when i test drove it i think i heard a very slight humming down there. i could barely hear it if it is anything. but does anybody think it would be anything to worry about? like i said it was very...
  13. General Snowmobile Discussion
    Hey i went for a long ride today and my speedometer stopped working. Any ideas where or how to change the cable? or should i check the bearings? Ive heard that was a sign of a bearing going bad. Any suggestions welcomed
1-13 of 13 Results
Top