Arctic Chat : Arctic Cat Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-18 of 35 Results
  1. Arctic Cat News
    Ended up rolling my article messing up quite a few things on my handlebar all extra components. followed up husband amd rolled our 2000 Toyota 4 runner same spot he found me Hackett goulch of the hardest trails in Colorado at the creek rolled heading up at 7:32 p.m.so we collected our guns...
  2. General ATV Discussion
    Hello all, I recently picked up a 2002 500 4x4 automatic. According to the previous owner it would barely rev at all, and break up while doing so. He was messing with the carb but didn't really know what he was doing. I got the quad home and he had swapped the idle and main jet, so it was idling...
  3. Utility ATV repair, maintenance, troubleshooting
    Ok so I just got the atv it jumps when put in gear so it is for sure going into gear sometimes it will take off if you hold it full throttle then once it’s moving it will keep going then you turn around and it doesn’t want to go at all. I checked the oil and bam none on the stick it took two...
  4. Utility ATV repair, maintenance, troubleshooting
    I have a 425 I recently rebuilt top end(piston and valves) I times it TDC with cam lobes down, getting fuel, compression and spark. thing still will not start no engine code popping on screen but does have a wrench. is there a way to figure out what it means without going to dealer? I tried the...
  5. Utility ATV repair, maintenance, troubleshooting
    Hey Folks, New to the forum and Arctic Cat world so hello! Recently purchased an 2006 Arctic Cat 650 SE and it one issue I was hoping someone on here could help me with. So the issue is a squealing sound that comes from the middle to front of the quad only when I start moving and come to a full...
  6. ATV WTB Directory
    Hey all, I’m getting an 03 400 fis 4x4 for free and it needs a new muffler badly, it’s completely rusted out and not repairable. I cannot find any aftermarket option for the 03’s, and the Oem is $600 or more. Has anyone found an aftermarket option?
  7. General ATV Discussion
    Hi guys, I'm new here as well as new to the atv mods. I have a stock 04 4x4 auto, I have done a lot of work to it and have it like new. I have always wanted a lifted fourwheeler on the oversized skinnys! I looked at lifts before but they all looked cheap....recently I discovered portals and...
  8. Utility ATV repair, maintenance, troubleshooting
    So on my brake calipers the bleeder valve is rusted in and cannot be removed. I need to bleed the brakes because of having to replace the oil reservoir, have to pump them now but at least it stops and is not spewing the brake oil every where. What are you using for new calipers not finding the...
  9. Arctic Cat News
    Im hoping someone can help me out here. My bike has no power to the gauge and won't turn over or pull over. I checked all the fuses, all good, checked to see if i have power at the 30Amp main, 15Amp ACC, and 10Amp Ignition, all at the fuse block and I have 12.7 volts at all of them. So then I...
  10. Utility ATV repair, maintenance, troubleshooting
    I recently bought an arctic cat 400 and it idles fine and reverse works fine but in high gear it barely moves in low it has a little more power but still nothing to leave the yard. I haven't jacked it up yet and tried but I have no clue what could be wrong with it. any help would be greatly...
  11. Utility ATV repair, maintenance, troubleshooting
    New member here, I joined because I have a question about my ATV. I have a 2005 Arctic Cat 400 4x4 Special Edition (winch, speedraks, alloy wheels, etc.) that has all the bells and whistles. I don’t drive it that much, and it only has 750 miles on it. The only thing wrong with is is the 4x4...
  12. General ATV Discussion
    i blew out my bevel gears in my 06 500 and i have looked around and notice people are getting straight cut gears to replace the old ones. i was wondering where i can get the gears and how much they would roughly cost? thank you
  13. General ATV Discussion
    my 06 cat is a great bike ive have pretty good luck with it except the last few weeks. when im just driving the trails it works great but as soon as i hook onto a trailer and go the rear end makes a slipping and grinding noise! :s i have no clue where to even start. im hoping its nothing major...
  14. General ATV Discussion
    Hello all, I am new to the ATV world. In fact I am borrowing one and had the worst situation possible develop. A friend sent me to his cabin (lives elsewhere) to get his ATV to borrow for plowing my driveway. Before leaving his place, I jumped the machine with my truck (bad idea???) and plowed...
  15. Utility ATV repair, maintenance, troubleshooting
    the other day i was riding in the snow and got stuck so i flipped my switch to 4x4 and the pod said it was in but it was still in 2 wheel drive even when i flip my diff lock. the actuator still makes the noise like it is engaging but nothing is working. anyone know what could be the problem?
  16. Utility Performance / Technical info
    I have a 2005 utility 500 4x4, my 4x4 was not engaging and I checked this site to get some ideas, long story short--THANKS. The input/output shaft had slid back from the front end, turns out the 2007 models have a spring to keep this from happening which will work on the 2005. It is as easy as...
  17. Utility ATV repair, maintenance, troubleshooting
    Hi i have a 2001 arctic cat 500 4x4and i am not sure if the battery is charging on it or not but my ? Is is the a 100% way to check the magneto to make sure it is working properly
1-18 of 35 Results
Top