Arctic Cat Forum banner

Search results

1-20 of 484 Results
Advanced Search
  1. Stock Primary Clutch changes 2018-2019

    C-Tec2 talk Only
    I wonder if that specs on the primary spring is a mis print. Did you look up the part number and see what the description is?
  2. 55 mm throttle body and reeds

    C-Tec2 talk Only
    On a stock cylinder engine probably a waste of money
  3. ZL 500 EFI slow off the line

    Z/ZL/ZR/ZRT/Tcat/EXT/jag/cougar
    When was the last time the clutch was actually rebuilt and how old is the belt?
  4. 2015 4000 rr zr Ride set up and shock questions

    Procross 2012-?
    Also that limiter strap was tight. 1 or 2 holes up from full loose is all you need. With them all the way out do a run and lock the brakes up. If the rear wants to kick out bring them up one hole
  5. 2015 4000 rr zr Ride set up and shock questions

    Procross 2012-?
    You will want to be 8 to 10 out on the rebound on the rear shock.
  6. wrenching on ctec2 tips and tricks

    C-Tec2 talk Only
    I was pissed my sled came with estart. I am sure my battery will crap out soon and I will end up rope starting it anyway
  7. Team Secondary Helix Bind

    Procross 2012-?
    That would cost money
  8. Belt deflection??

    Procross 2012-?
    Take picture of the clutch.
  9. Dalton Pro Quick Adjust QA270

    C-Tec2 talk Only
    I would order the 73 gram base weight that way you will only have to fine tune them with the small screws. The daltons are very limited in what you can do with vs any other adjustable weight out there. Read the directions for them and it will outline how they can and can not be loaded.
  10. 2015 4000 rr zr Ride set up and shock questions

    Procross 2012-?
    What hole are they in?? My 129 800 needed the center hole to balance it out. My 600 I went 1 up from full loose
  11. 2015 4000 rr zr Ride set up and shock questions

    Procross 2012-?
    See the pinned topic about suspension set up that will give you a starting point. The rr will ride terrible over small chop compared to an lxr. Anything else it will out perform that sled. The suspension changes in the rr do make a difference over the rest of the line. You can get the rr dialed...
  12. Potential solution for hand numbness

    Procross 2012-?
    Have you considered going to 1 1/8 tapered bars? Those are supposed to help as well
  13. Removing upper idler wheel

    C-Tec2 talk Only
    I use a puller
  14. Secondary Clutch PNs 2018 - 2020

    C-Tec2 talk Only
    My friend figured out what the angles are but I forgot what he told me it is. Maybe a 64/49.46?? slightly steeper than last year. The spring is the same one out they have been using in the m8. We think they went to that to help with the slip off the line and to back shift fast to handle the...
  15. Riot x 800 muffler

    C-Tec2 talk Only
    Ggb are garbage cans. They are loud though.
  16. Secondary Clutch PNs 2018 - 2020

    C-Tec2 talk Only
    The clutch will open slower and close faster with a stiffer spring
  17. Secondary Clutch PNs 2018 - 2020

    C-Tec2 talk Only
    This is the second time they have upped the spring on these sleds. Probably to help with belt slip in the secondary on the low end and to back shift faster to keep up with the track load
  18. Secondary Clutch PNs 2018 - 2020

    C-Tec2 talk Only
    The secondary does not effect clutch engagement. An un calibrated clutch comes with out a helix and spring
  19. Drive Train Improvement FAQs

    Procross 2012-?
    No they aren’t. Do yourself a favor and buy a 2014 or newer
  20. Team Secondary Helix Bind

    Procross 2012-?
    I have done nothing to my sled to correct it. To bring the rpm down it needs clutch parts
1-20 of 484 Results
Top