Burnt Plugs - 2001 300 ATV - ArcticChat.com - Arctic Cat Forum
Utility ATV repair and maintenance & Troubleshooting Place your Utility ATV Repair and Maintenance questions/thoughts here... *not performance*

 
LinkBack Thread Tools Display Modes
post #1 of 5 Old 04-22-2019, 01:08 PM Thread Starter
Junior Member
 
Junior Member
Join Date: Apr 2019
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Burnt Plugs - 2001 300 ATV

Hi everyone. I have a 2001 Artic Cat 300. It keeps burning plugs. They came out very black, dry, carbon.

If you put a new plug in it will run great for awhile. Eventually it will quite running. You can clean the plug a few times and get more life out of it. But sooner or later it must be replaced.

I had the carb cleaned and serviced.
Then I tried thinning out the air/fuel mix but it hasn't helped.

I'm running DR7EA. Is there a better plug to run? Something hotter? Iridium?

The bike has had the odd electrical glitch from time to time, but is usually fine. Could this be an electrical issue? How would that be diagnosed?

Thanks
Artic Cat Eli is offline  
Sponsored Links
Advertisement
 
post #2 of 5 Old 04-22-2019, 01:48 PM
Administrator
 
doorfx's Avatar
ArcticChat.com Admin
 
Administrator
Join Date: Jan 2011
Location: Calgary AB.
Posts: 34,852
Thanks: 3,662
Thanked 3,015 Times in 2,786 Posts
Garage
ATV: 13 700 XT trv
2010 Mileage: 800
2007 Mileage: 800
2006 Mileage: 800
Check voltage at the battery when itís running. Report back

2013 700 XT TRV EPS :
28" Bighorns on bed linered 08 Prowler rims , Wireless winch remote, 3000LB. Warn winch, Heated front and rear grips, Cat relay wiring harness for accessories, LED light bar, 08 650 trv LTD rear box, Heated rear seat, Elka stage 3 shocks all 4 corners, Aftermarket A-arm bushings, aftermarket sway bar bushings(prototype), Deluxe brush guard bumpers front and rear, Red anodized Hause fairlead, beverage opener winch hook, Synthetic winch rope, RTR motor mount bushings, Dynojet PC5 programmer, Dynojet Autotune, [/B]

07 500 Gone but not forgotten;
Dynojet/142m/45p/3rd/3turns--Clipped and drilled--Unifilter--Easy adjust PMS--L.C.V. mod--AC Swaybar--Exhaust mod--2"Snorkels--Sanny shock bushings-- Airdam stage 1--PSC phase 2--21/ 23gr rollers--Dalton yellow spring--.7mm shim--Sanny Steerlites--RTR Flex Bracket--2 up seat / pegs--Tach--AC handguards--28" Outlaw mst's--Skull tailight--Skull shifter--Self Resetting Breakers--1" Wheel spacers--Customcncparts Steering Damper--AC deluxe handwarmers--6000k HID'S hi/lo--AC Deluxe Bumpers--Inline Fuel Filter-- O2 sensor \AFR guage--Black Magic Full Stainless Exhaust System--Wireless Winch Remote--29.5 Outlaws--Fox Podium X Rear Shocks--




It's mind over matter,If you don't mind,
It just doesn't matter

No Boost No Bottle
just balls and throttle
doorfx is offline  
post #3 of 5 Old 04-29-2019, 10:41 PM
Administrator
 
doorfx's Avatar
ArcticChat.com Admin
 
Administrator
Join Date: Jan 2011
Location: Calgary AB.
Posts: 34,852
Thanks: 3,662
Thanked 3,015 Times in 2,786 Posts
Garage
ATV: 13 700 XT trv
2010 Mileage: 800
2007 Mileage: 800
2006 Mileage: 800
So did you check the voltage?

2013 700 XT TRV EPS :
28" Bighorns on bed linered 08 Prowler rims , Wireless winch remote, 3000LB. Warn winch, Heated front and rear grips, Cat relay wiring harness for accessories, LED light bar, 08 650 trv LTD rear box, Heated rear seat, Elka stage 3 shocks all 4 corners, Aftermarket A-arm bushings, aftermarket sway bar bushings(prototype), Deluxe brush guard bumpers front and rear, Red anodized Hause fairlead, beverage opener winch hook, Synthetic winch rope, RTR motor mount bushings, Dynojet PC5 programmer, Dynojet Autotune, [/B]

07 500 Gone but not forgotten;
Dynojet/142m/45p/3rd/3turns--Clipped and drilled--Unifilter--Easy adjust PMS--L.C.V. mod--AC Swaybar--Exhaust mod--2"Snorkels--Sanny shock bushings-- Airdam stage 1--PSC phase 2--21/ 23gr rollers--Dalton yellow spring--.7mm shim--Sanny Steerlites--RTR Flex Bracket--2 up seat / pegs--Tach--AC handguards--28" Outlaw mst's--Skull tailight--Skull shifter--Self Resetting Breakers--1" Wheel spacers--Customcncparts Steering Damper--AC deluxe handwarmers--6000k HID'S hi/lo--AC Deluxe Bumpers--Inline Fuel Filter-- O2 sensor \AFR guage--Black Magic Full Stainless Exhaust System--Wireless Winch Remote--29.5 Outlaws--Fox Podium X Rear Shocks--




It's mind over matter,If you don't mind,
It just doesn't matter

No Boost No Bottle
just balls and throttle
doorfx is offline  
Sponsored Links
Advertisement
 
post #4 of 5 Old 06-10-2019, 01:54 PM Thread Starter
Junior Member
 
Junior Member
Join Date: Apr 2019
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Hi, things got very crazy busy here for awhile but finally have a chance to get back to the bike today. Voltage while running is between 12.20 - 12.90

Thanks
Artic Cat Eli is offline  
post #5 of 5 Old 06-10-2019, 02:49 PM
Administrator
 
doorfx's Avatar
ArcticChat.com Admin
 
Administrator
Join Date: Jan 2011
Location: Calgary AB.
Posts: 34,852
Thanks: 3,662
Thanked 3,015 Times in 2,786 Posts
Garage
ATV: 13 700 XT trv
2010 Mileage: 800
2007 Mileage: 800
2006 Mileage: 800
Your voltage regulator/ rectifier is not working. You should be in the 14ís when running.

2013 700 XT TRV EPS :
28" Bighorns on bed linered 08 Prowler rims , Wireless winch remote, 3000LB. Warn winch, Heated front and rear grips, Cat relay wiring harness for accessories, LED light bar, 08 650 trv LTD rear box, Heated rear seat, Elka stage 3 shocks all 4 corners, Aftermarket A-arm bushings, aftermarket sway bar bushings(prototype), Deluxe brush guard bumpers front and rear, Red anodized Hause fairlead, beverage opener winch hook, Synthetic winch rope, RTR motor mount bushings, Dynojet PC5 programmer, Dynojet Autotune, [/B]

07 500 Gone but not forgotten;
Dynojet/142m/45p/3rd/3turns--Clipped and drilled--Unifilter--Easy adjust PMS--L.C.V. mod--AC Swaybar--Exhaust mod--2"Snorkels--Sanny shock bushings-- Airdam stage 1--PSC phase 2--21/ 23gr rollers--Dalton yellow spring--.7mm shim--Sanny Steerlites--RTR Flex Bracket--2 up seat / pegs--Tach--AC handguards--28" Outlaw mst's--Skull tailight--Skull shifter--Self Resetting Breakers--1" Wheel spacers--Customcncparts Steering Damper--AC deluxe handwarmers--6000k HID'S hi/lo--AC Deluxe Bumpers--Inline Fuel Filter-- O2 sensor \AFR guage--Black Magic Full Stainless Exhaust System--Wireless Winch Remote--29.5 Outlaws--Fox Podium X Rear Shocks--




It's mind over matter,If you don't mind,
It just doesn't matter

No Boost No Bottle
just balls and throttle
doorfx is offline  
Reply

  Lower Navigation
Go Back   ArcticChat.com - Arctic Cat Forum > ATV's > Utility ATV repair and maintenance & Troubleshooting

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the ArcticChat.com - Arctic Cat Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in













Similar Threads
Thread Thread Starter Forum Replies Last Post
Rear Suspension Shock Replacement weazel Z/ZL/ZR/ZRT/Tcat/EXT/jag/cougar 8 04-14-2019 06:25 AM
Zr440 fouls plugs alot Joeyapete Arctic Cat Snowmobiles 0 02-03-2019 06:04 PM
2001 440 SnoPro help Benjimoto Z/ZL/ZR/ZRT/Tcat/EXT/jag/cougar 20 10-13-2018 01:15 PM
2001 ZR 800 Struggling to read the plugs natedog96 Prowler 0 01-10-2018 04:50 PM
2008 F5 LXR Starts, bogs stalls and fauls plugs HELP mpilihp F Chassis 2007- ?? 1 01-04-2017 10:14 AM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome