2015 Mudpro 1000 blown belt - ArcticChat.com - Arctic Cat Forum
All terrain ect.. repair/service manuals A place to share manuals

 
LinkBack Thread Tools Display Modes
post #1 of 5 Old 12-08-2018, 09:46 AM Thread Starter
Junior Member
 
Stoopy87's Avatar
 
Junior Member
Join Date: Jun 2018
Posts: 11
Thanks: 0
Thanked 0 Times in 0 Posts
2015 Mudpro 1000 blown belt

Hey guys, had the bike the for about 7 months, bought it used with less then 400 kms and just over 100hrs on it. When I got it home I went and for a run with it and it grenades the the drive belt, assumed it abused before I got it and I put a new dayco belt in it. When it was apart I took the clutches off and cleaned it and made sure everything was lined up, stuck the belt in everything is good...
Fast forward 500 kms and 40ish hours, on the way home after a day long run the belt let's go again. Now before I go and put another belt in this thing is there something I should be looking for? It's got stock tires on it, I run in low gear when doing low speeds on the trails, and there's no abnormal noises coming from the clutch case.
Any help or direction would be great. Thanks
Stoopy87 is offline  
Sponsored Links
Advertisement
 
post #2 of 5 Old 12-08-2018, 08:01 PM
Administrator
 
doorfx's Avatar
ArcticChat.com Admin
 
Administrator
Join Date: Jan 2011
Location: Calgary AB.
Posts: 34,845
Thanks: 3,661
Thanked 3,015 Times in 2,786 Posts
Garage
ATV: 13 700 XT trv
2010 Mileage: 800
2007 Mileage: 800
2006 Mileage: 800
2015 Mudpro 1000 blown belt

1- donít use a dayco belt stick with oem
2- check your rollers for flat spots , and check the valleys for damage.
3- did you check the secondary for bits of belt stuck in it.
4- check the intake and exhaust ductwork for obstructions

2013 700 XT TRV EPS :
28" Bighorns on bed linered 08 Prowler rims , Wireless winch remote, 3000LB. Warn winch, Heated front and rear grips, Cat relay wiring harness for accessories, LED light bar, 08 650 trv LTD rear box, Heated rear seat, Elka stage 3 shocks all 4 corners, Aftermarket A-arm bushings, aftermarket sway bar bushings(prototype), Deluxe brush guard bumpers front and rear, Red anodized Hause fairlead, beverage opener winch hook, Synthetic winch rope, RTR motor mount bushings, Dynojet PC5 programmer, Dynojet Autotune, [/B]

07 500 Gone but not forgotten;
Dynojet/142m/45p/3rd/3turns--Clipped and drilled--Unifilter--Easy adjust PMS--L.C.V. mod--AC Swaybar--Exhaust mod--2"Snorkels--Sanny shock bushings-- Airdam stage 1--PSC phase 2--21/ 23gr rollers--Dalton yellow spring--.7mm shim--Sanny Steerlites--RTR Flex Bracket--2 up seat / pegs--Tach--AC handguards--28" Outlaw mst's--Skull tailight--Skull shifter--Self Resetting Breakers--1" Wheel spacers--Customcncparts Steering Damper--AC deluxe handwarmers--6000k HID'S hi/lo--AC Deluxe Bumpers--Inline Fuel Filter-- O2 sensor \AFR guage--Black Magic Full Stainless Exhaust System--Wireless Winch Remote--29.5 Outlaws--Fox Podium X Rear Shocks--




It's mind over matter,If you don't mind,
It just doesn't matter

No Boost No Bottle
just balls and throttle
doorfx is offline  
post #3 of 5 Old 12-16-2018, 10:39 PM
Administrator
 
doorfx's Avatar
ArcticChat.com Admin
 
Administrator
Join Date: Jan 2011
Location: Calgary AB.
Posts: 34,845
Thanks: 3,661
Thanked 3,015 Times in 2,786 Posts
Garage
ATV: 13 700 XT trv
2010 Mileage: 800
2007 Mileage: 800
2006 Mileage: 800
Any luck?

2013 700 XT TRV EPS :
28" Bighorns on bed linered 08 Prowler rims , Wireless winch remote, 3000LB. Warn winch, Heated front and rear grips, Cat relay wiring harness for accessories, LED light bar, 08 650 trv LTD rear box, Heated rear seat, Elka stage 3 shocks all 4 corners, Aftermarket A-arm bushings, aftermarket sway bar bushings(prototype), Deluxe brush guard bumpers front and rear, Red anodized Hause fairlead, beverage opener winch hook, Synthetic winch rope, RTR motor mount bushings, Dynojet PC5 programmer, Dynojet Autotune, [/B]

07 500 Gone but not forgotten;
Dynojet/142m/45p/3rd/3turns--Clipped and drilled--Unifilter--Easy adjust PMS--L.C.V. mod--AC Swaybar--Exhaust mod--2"Snorkels--Sanny shock bushings-- Airdam stage 1--PSC phase 2--21/ 23gr rollers--Dalton yellow spring--.7mm shim--Sanny Steerlites--RTR Flex Bracket--2 up seat / pegs--Tach--AC handguards--28" Outlaw mst's--Skull tailight--Skull shifter--Self Resetting Breakers--1" Wheel spacers--Customcncparts Steering Damper--AC deluxe handwarmers--6000k HID'S hi/lo--AC Deluxe Bumpers--Inline Fuel Filter-- O2 sensor \AFR guage--Black Magic Full Stainless Exhaust System--Wireless Winch Remote--29.5 Outlaws--Fox Podium X Rear Shocks--




It's mind over matter,If you don't mind,
It just doesn't matter

No Boost No Bottle
just balls and throttle
doorfx is offline  
Sponsored Links
Advertisement
 
post #4 of 5 Old 12-27-2018, 04:21 PM Thread Starter
Junior Member
 
Stoopy87's Avatar
 
Junior Member
Join Date: Jun 2018
Posts: 11
Thanks: 0
Thanked 0 Times in 0 Posts
Alright so most of December was a right off but I finally stripped the bike apart and had a look at what I was dealing with. The belt grenaded again worse this time.
So I had a look at the secondary and primary no score marks on them, there was pieces of the belt in the secondary but I spread it apart and they fell out. Took the rollers out of the primary and they look good. All of the plumbing will be coming apart again for cleaning.
Should there be a arctic cat stamp on the primary? I seen it on the secondary. I'm ordering an oem belt for it but I want to be sure I'm not missing anything.
Attached Thumbnails
Click image for larger version

Name:	20181221_100617_1545948982126.jpg
Views:	23
Size:	2.48 MB
ID:	344605   Click image for larger version

Name:	20181221_100656_1545949062565.jpg
Views:	17
Size:	1.70 MB
ID:	344607   Click image for larger version

Name:	20181221_100719_1545949168702.jpg
Views:	13
Size:	2.35 MB
ID:	344609   Click image for larger version

Name:	20181221_134356_1545949226421.jpg
Views:	14
Size:	3.05 MB
ID:	344611   Click image for larger version

Name:	20181221_100635_1545949301711.jpg
Views:	22
Size:	2.87 MB
ID:	344613  

Stoopy87 is offline  
post #5 of 5 Old 12-28-2018, 12:45 PM
Administrator
 
doorfx's Avatar
ArcticChat.com Admin
 
Administrator
Join Date: Jan 2011
Location: Calgary AB.
Posts: 34,845
Thanks: 3,661
Thanked 3,015 Times in 2,786 Posts
Garage
ATV: 13 700 XT trv
2010 Mileage: 800
2007 Mileage: 800
2006 Mileage: 800
https://www.arcticchat.com/forum/pin...-clutches.html

2013 700 XT TRV EPS :
28" Bighorns on bed linered 08 Prowler rims , Wireless winch remote, 3000LB. Warn winch, Heated front and rear grips, Cat relay wiring harness for accessories, LED light bar, 08 650 trv LTD rear box, Heated rear seat, Elka stage 3 shocks all 4 corners, Aftermarket A-arm bushings, aftermarket sway bar bushings(prototype), Deluxe brush guard bumpers front and rear, Red anodized Hause fairlead, beverage opener winch hook, Synthetic winch rope, RTR motor mount bushings, Dynojet PC5 programmer, Dynojet Autotune, [/B]

07 500 Gone but not forgotten;
Dynojet/142m/45p/3rd/3turns--Clipped and drilled--Unifilter--Easy adjust PMS--L.C.V. mod--AC Swaybar--Exhaust mod--2"Snorkels--Sanny shock bushings-- Airdam stage 1--PSC phase 2--21/ 23gr rollers--Dalton yellow spring--.7mm shim--Sanny Steerlites--RTR Flex Bracket--2 up seat / pegs--Tach--AC handguards--28" Outlaw mst's--Skull tailight--Skull shifter--Self Resetting Breakers--1" Wheel spacers--Customcncparts Steering Damper--AC deluxe handwarmers--6000k HID'S hi/lo--AC Deluxe Bumpers--Inline Fuel Filter-- O2 sensor \AFR guage--Black Magic Full Stainless Exhaust System--Wireless Winch Remote--29.5 Outlaws--Fox Podium X Rear Shocks--




It's mind over matter,If you don't mind,
It just doesn't matter

No Boost No Bottle
just balls and throttle
doorfx is offline  
Reply

  Lower Navigation
Go Back   ArcticChat.com - Arctic Cat Forum > ATV's > Utility ATV repair and maintenance & Troubleshooting > All terrain ect.. repair/service manuals

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the ArcticChat.com - Arctic Cat Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
2015 ZR 4000 RR belt adjustment gdub41 Procross 2012-? 1 01-28-2018 02:13 PM
Have a few questions, just bought a new 2014 Mudpro 1000 Moosehunter1980 General ATV Discussion 2 05-15-2017 06:13 PM
2015 MudPro 1000 EPS - Thoughts? mpj2201 General ATV Discussion 7 04-28-2017 11:50 AM
Thundercat 1000 Belt replacements? blackthorn9998 Z/ZL/ZR/ZRT/Tcat/EXT/jag/cougar 1 01-14-2017 12:15 AM
2015 1000 mudpro problems Ethanwo93 Utility ATV repair and maintenance & Troubleshooting 25 06-07-2016 09:48 AM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome