2007 650 H! TRV will not start! - ArcticChat.com - Arctic Cat Forum
All terrain ect.. repair/service manuals A place to share manuals

 
LinkBack Thread Tools Display Modes
post #1 of 9 Old 07-08-2018, 05:43 PM Thread Starter
Junior Member
 
DCUnger60@gmail.com's Avatar
 
Junior Member
Join Date: Jul 2018
Location: Rocksprings, TX
Posts: 5
Thanks: 2
Thanked 0 Times in 0 Posts
2007 650 H! TRV will not start!

No fuel getting to Carb.
drained gas tank, but noticed no vent lines...
Assuming one vent line goes to Carb and one to fuel pump, just can not find vent line on carb...
Any Idea where to look with out taking the whole unit apart to see where it goes???

Thanks, DC!
Sponsored Links
Advertisement
 
post #2 of 9 Old 07-08-2018, 07:03 PM
Administrator
 
doorfx's Avatar
ArcticChat.com Admin
 
Administrator
Join Date: Jan 2011
Location: Calgary AB.
Posts: 34,735
Thanks: 3,646
Thanked 3,011 Times in 2,782 Posts
Garage
ATV: 13 700 XT trv
2010 Mileage: 800
2007 Mileage: 800
2006 Mileage: 800
One vent one goes from tank to nipple on intake rubber boot. One gent line from carb up to handle bars.

2013 700 XT TRV EPS :
28" Bighorns on bed linered 08 Prowler rims , Wireless winch remote, 3000LB. Warn winch, Heated front and rear grips, Cat relay wiring harness for accessories, LED light bar, 08 650 trv LTD rear box, Heated rear seat, Elka stage 3 shocks all 4 corners, Aftermarket A-arm bushings, aftermarket sway bar bushings(prototype), Deluxe brush guard bumpers front and rear, Red anodized Hause fairlead, beverage opener winch hook, Synthetic winch rope, RTR motor mount bushings, Dynojet PC5 programmer, Dynojet Autotune, [/B]

07 500 Gone but not forgotten;
Dynojet/142m/45p/3rd/3turns--Clipped and drilled--Unifilter--Easy adjust PMS--L.C.V. mod--AC Swaybar--Exhaust mod--2"Snorkels--Sanny shock bushings-- Airdam stage 1--PSC phase 2--21/ 23gr rollers--Dalton yellow spring--.7mm shim--Sanny Steerlites--RTR Flex Bracket--2 up seat / pegs--Tach--AC handguards--28" Outlaw mst's--Skull tailight--Skull shifter--Self Resetting Breakers--1" Wheel spacers--Customcncparts Steering Damper--AC deluxe handwarmers--6000k HID'S hi/lo--AC Deluxe Bumpers--Inline Fuel Filter-- O2 sensor \AFR guage--Black Magic Full Stainless Exhaust System--Wireless Winch Remote--29.5 Outlaws--Fox Podium X Rear Shocks--




It's mind over matter,If you don't mind,
It just doesn't matter

No Boost No Bottle
just balls and throttle
doorfx is offline  
The Following User Says Thank You to doorfx For This Useful Post:
[email protected] (07-09-2018)
post #3 of 9 Old 07-09-2018, 07:40 AM Thread Starter
Junior Member
 
DCUnger60@gmail.com's Avatar
 
Junior Member
Join Date: Jul 2018
Location: Rocksprings, TX
Posts: 5
Thanks: 2
Thanked 0 Times in 0 Posts
I can not find where the Vacuum Pulse Fuel Pump connects for the vacuum source...
Sponsored Links
Advertisement
 
post #4 of 9 Old 07-09-2018, 09:09 AM
Administrator
 
tiggershark's Avatar
ArcticChat.com Admin
 
Administrator
Join Date: Oct 2003
Location: Grand Rapids, Mi
Posts: 7,543
Thanks: 80
Thanked 549 Times in 472 Posts
Garage
Sled: 2015 ZR 8000 El Tigre' '16 ZR 6000 LXR
ATV: 2014 1000XT & 2017 700XT Camo
Between the carb and the cylinder head, its a rubber port with a rubber hose on it. You can see the small rubber port from the right side of the machine. They break sometimes and you might need a new one. part number 23 Listed under cylinder head assembly
https://www.countrycat.com/arctic-ca...TBS4BUSQ/85845



“How is education supposed to make me feel smarter? Besides, every time I learn something new, it pushes some old stuff out of my brain. Remember when I took that home winemaking course, and I forgot how to drive?”


I want to share something with you: The three little sentences that will get you through life. Number 1: Cover for me. Number 2: Oh, good idea, Boss! Number 3: It was like that when I got here.


Up the creek without a saddle. The straw that broke the camel's neck.. Archie Bunker
tiggershark is offline  
The Following User Says Thank You to tiggershark For This Useful Post:
[email protected] (07-09-2018)
post #5 of 9 Old 07-09-2018, 09:28 AM Thread Starter
Junior Member
 
DCUnger60@gmail.com's Avatar
 
Junior Member
Join Date: Jul 2018
Location: Rocksprings, TX
Posts: 5
Thanks: 2
Thanked 0 Times in 0 Posts
Any suggestions of the easiest way to get to it? or do I need to pull the whole front off?
Several vent hoses are gone, due to age and mice. I have to get to both the carb vent port and the vac port on head...
Is there a easy way to pull the air filter housing off with out removing front fenders???


Thanks!
DC

Last edited by [email protected]; 07-09-2018 at 11:21 AM.
post #6 of 9 Old 07-09-2018, 11:49 AM
Administrator
 
doorfx's Avatar
ArcticChat.com Admin
 
Administrator
Join Date: Jan 2011
Location: Calgary AB.
Posts: 34,735
Thanks: 3,646
Thanked 3,011 Times in 2,782 Posts
Garage
ATV: 13 700 XT trv
2010 Mileage: 800
2007 Mileage: 800
2006 Mileage: 800
Just remove your seat and side covers

2013 700 XT TRV EPS :
28" Bighorns on bed linered 08 Prowler rims , Wireless winch remote, 3000LB. Warn winch, Heated front and rear grips, Cat relay wiring harness for accessories, LED light bar, 08 650 trv LTD rear box, Heated rear seat, Elka stage 3 shocks all 4 corners, Aftermarket A-arm bushings, aftermarket sway bar bushings(prototype), Deluxe brush guard bumpers front and rear, Red anodized Hause fairlead, beverage opener winch hook, Synthetic winch rope, RTR motor mount bushings, Dynojet PC5 programmer, Dynojet Autotune, [/B]

07 500 Gone but not forgotten;
Dynojet/142m/45p/3rd/3turns--Clipped and drilled--Unifilter--Easy adjust PMS--L.C.V. mod--AC Swaybar--Exhaust mod--2"Snorkels--Sanny shock bushings-- Airdam stage 1--PSC phase 2--21/ 23gr rollers--Dalton yellow spring--.7mm shim--Sanny Steerlites--RTR Flex Bracket--2 up seat / pegs--Tach--AC handguards--28" Outlaw mst's--Skull tailight--Skull shifter--Self Resetting Breakers--1" Wheel spacers--Customcncparts Steering Damper--AC deluxe handwarmers--6000k HID'S hi/lo--AC Deluxe Bumpers--Inline Fuel Filter-- O2 sensor \AFR guage--Black Magic Full Stainless Exhaust System--Wireless Winch Remote--29.5 Outlaws--Fox Podium X Rear Shocks--




It's mind over matter,If you don't mind,
It just doesn't matter

No Boost No Bottle
just balls and throttle
doorfx is offline  
post #7 of 9 Old 07-09-2018, 01:04 PM Thread Starter
Junior Member
 
DCUnger60@gmail.com's Avatar
 
Junior Member
Join Date: Jul 2018
Location: Rocksprings, TX
Posts: 5
Thanks: 2
Thanked 0 Times in 0 Posts
I had to remove a lot more than that, but did find the vacuum barb on intake to fuel pump vent.
I also have found a missing vent line from fuel tank to cluster.

So it looks like I may have found it pic#0004, carb. vent barb for vent to cluster,

I have even used a inspection camera...

Thanks for the help!
DC
Attached Thumbnails
Click image for larger version

Name:	DCIM0002.JPG
Views:	18
Size:	618.1 KB
ID:	340649   Click image for larger version

Name:	DCIM0004.JPG
Views:	13
Size:	557.9 KB
ID:	340651  

Last edited by [email protected]; 07-09-2018 at 01:17 PM.
post #8 of 9 Old 07-10-2018, 12:11 PM Thread Starter
Junior Member
 
DCUnger60@gmail.com's Avatar
 
Junior Member
Join Date: Jul 2018
Location: Rocksprings, TX
Posts: 5
Thanks: 2
Thanked 0 Times in 0 Posts
Is the fuel hose and vent hose the same now?
Will any 1/4" fuel hose work for both vent lines and fuel???
post #9 of 9 Old 07-10-2018, 01:06 PM
Administrator
 
doorfx's Avatar
ArcticChat.com Admin
 
Administrator
Join Date: Jan 2011
Location: Calgary AB.
Posts: 34,735
Thanks: 3,646
Thanked 3,011 Times in 2,782 Posts
Garage
ATV: 13 700 XT trv
2010 Mileage: 800
2007 Mileage: 800
2006 Mileage: 800
Just make sure that the fuel line is ethanol rated.

2013 700 XT TRV EPS :
28" Bighorns on bed linered 08 Prowler rims , Wireless winch remote, 3000LB. Warn winch, Heated front and rear grips, Cat relay wiring harness for accessories, LED light bar, 08 650 trv LTD rear box, Heated rear seat, Elka stage 3 shocks all 4 corners, Aftermarket A-arm bushings, aftermarket sway bar bushings(prototype), Deluxe brush guard bumpers front and rear, Red anodized Hause fairlead, beverage opener winch hook, Synthetic winch rope, RTR motor mount bushings, Dynojet PC5 programmer, Dynojet Autotune, [/B]

07 500 Gone but not forgotten;
Dynojet/142m/45p/3rd/3turns--Clipped and drilled--Unifilter--Easy adjust PMS--L.C.V. mod--AC Swaybar--Exhaust mod--2"Snorkels--Sanny shock bushings-- Airdam stage 1--PSC phase 2--21/ 23gr rollers--Dalton yellow spring--.7mm shim--Sanny Steerlites--RTR Flex Bracket--2 up seat / pegs--Tach--AC handguards--28" Outlaw mst's--Skull tailight--Skull shifter--Self Resetting Breakers--1" Wheel spacers--Customcncparts Steering Damper--AC deluxe handwarmers--6000k HID'S hi/lo--AC Deluxe Bumpers--Inline Fuel Filter-- O2 sensor \AFR guage--Black Magic Full Stainless Exhaust System--Wireless Winch Remote--29.5 Outlaws--Fox Podium X Rear Shocks--




It's mind over matter,If you don't mind,
It just doesn't matter

No Boost No Bottle
just balls and throttle
doorfx is offline  
Reply

  Lower Navigation
Go Back   ArcticChat.com - Arctic Cat Forum > ATV's > Utility ATV repair and maintenance & Troubleshooting > All terrain ect.. repair/service manuals

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the ArcticChat.com - Arctic Cat Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
2007 700 efi sputtering and won't start jbuscher69 Utility ATV repair and maintenance & Troubleshooting 17 06-17-2017 11:21 AM
2016 8000 hesitation. Flying Dutchman Procross 2012-? 27 02-08-2017 05:08 AM
Electric start - 2007 F1000 watchdog F Chassis 2007- ?? 0 12-04-2016 07:17 PM
2007 700 wont start Houndhunter112 Utility ATV repair and maintenance & Troubleshooting 1 09-23-2016 01:09 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome