Jawz silencer/can install on 09 Xfire 8 SnoPro Options

[Shift_Fast]

Hey fellas, first post and trying for some advice. Nice to meet all you, lots of info here.

I am trying to install a Jawz silencer can on a 09 Crossfire 800 SnoPro. So far I have pulled out the old can and pretty much installed the Jawz can by putting it in place and attaching the exhaust springs from the stock pipe to the Jawz can. The issue is, the can moves up and down by hand with everything in place, which tells me the first bump this thing hits the can is gonna hop up and maybe start dumping right into the belly pan and most likely burn a wicked hole in it.

Now the can came with some L shaped tabs and rivets so you can rivet them into the belly pan and use some more exhaust springs to go from the tabs I rivet to some tabs on the can (which are in a position on the can that is not in a straight pull downward?).

Ok, I guess what i am asking is if anyone has any experience with this install/setup and what you have done. Any info, pics, advice would be awesome. Thanks.