ArcticChat.com >> It's All About the Pride®

Welcome Guest ( Log In | Register )

need a aluminum clutch cover for a 06 700 efi

Options

whitley8314 View Member Profile View Member Albums	Nov 3 2009, 01:45 PM Post #1
Member Group: Members Posts: 54 Joined: 21-February 09 Member No.: 35912 My Location: ************** Your Age: 22 Your ATV: 08 Thunder cat	The 06 700 had a plstic clutch cover and i was wanting to know if anybody made a aluminum cover for that, i can nit keep the water out of it.

JD700EFI View Member Profile	Nov 3 2009, 02:49 PM Post #2
Advanced Member Group: Team Arcticchat Posts: 1192 Joined: 25-February 08 From: Pennsylvania Member No.: 27222 My Location: Pennsylvania Your Age: 25 Your ATV: 2007 Arctic Cat 700 EFI	Don't think anyone makes a different cover that will fit the Suzuki 700's. May want to look for suzuki accessories and see if they have a replacement cover. -------------------- 2007 ARCTIC CAT 700 EFI: Marsh Green arctic cat shock covers arctic cat hand guards WARN 2500LB front mounted winch AC front and rear bumpers ITP mudlite XL's 25x8x12, 25x10x12 ITP type 7 black powder coat wheels Highlifter widetrac wheel spacers 1in front, 1.5in rear 2006 ARCTIC CAT 700EFI LE Burnt Orange (2500lb winch, front and rear bumpers) arctic cat shock covers arctic cat hand guards heated grips and throttle reverse light 4in rack extentions front, 8 in rear Arctic Cat Speedrack backrest 27" ITP Mudlite XTR's 14" ITP type 7 clear coat wheels Eagle plow 2007 ARCTIC CAT 500 Auto.: Red WARN 2500lb winch AC front and rear bumpers AC hand guards 12" ITP SS106 wheels 25" Kenda Bear Claws

Savageman69 View Member Profile View Member Albums	Nov 3 2009, 07:27 PM Post #3
Advanced Member Group: Team Arcticchat Posts: 1470 Joined: 28-March 07 Member No.: 19329 My Location: Huron Park, Ontario, Canada Your Age: 24 Your Sled(s): 1995 Polaris XCR 600 Triple Your ATV: 2007 Arctic Cat 700 EFI	Never seen one yet...probably could be made but it would be costly. Good luck getting it water tight mine leaks a tiny bit but since the clutch machining it doesnt matter cuz it dont slip lol. -------------------- 2007 Arctic Cat 700 EFI A/C Alloy Rims / 28 Inch Outlaw MST`s - A/C Hand Guards - A/C Heated Grips - 25 Inch ITP 589`s On grey steels - Deluxe Front and Rear Bumpers - Viper Elite 3500lb - Amr Racing Monster coil - 60 Inch Cat Plow - Amsteel (blue) Synthetic Winch Rope - UHMW Fairlead - Winch Saver - Full Snorkels - Rad Relocation - Uni Air Filter - Modded Stock Exhaust - Dalton Clutch Kit - Fixed Plate Mod - 2.5mm Machined Primary - M109R Injector - VDI Copperhead Ecu - Odyssey PC680 - Bedlined Bumpers - M109R Motor Mounts - Skull Shifter - Red LED`s In Headlights - Led Tail Light - Slim HID Headlights 6k(low`s) - Engine Ice - Heat shielded Side Panels

catwalkin View Member Profile View Member Albums	Nov 3 2009, 08:51 PM Post #4
Advanced Member Group: Members Posts: 417 Joined: 2-April 09 From: new england Member No.: 36942 My Location: new england 2009 Mileage (ATV): so far 1000	is the one on the king quad plastic? -------------------- 09 MUD PRO 700H1 29,5S 10,S AND 12,S NUFF SAID 05 500 MANUAL OFTEN IMITATED BUT NEVER DUPLICATED

Savageman69 View Member Profile View Member Albums	Nov 3 2009, 10:38 PM Post #5
Advanced Member Group: Team Arcticchat Posts: 1470 Joined: 28-March 07 Member No.: 19329 My Location: Huron Park, Ontario, Canada Your Age: 24 Your Sled(s): 1995 Polaris XCR 600 Triple Your ATV: 2007 Arctic Cat 700 EFI	QUOTE (catwalkin @ Nov 3 2009, 08:51 PM) is the one on the king quad plastic? yes it sure is...altho i dont know if the 750 king is metal as it may work. -------------------- 2007 Arctic Cat 700 EFI A/C Alloy Rims / 28 Inch Outlaw MST`s - A/C Hand Guards - A/C Heated Grips - 25 Inch ITP 589`s On grey steels - Deluxe Front and Rear Bumpers - Viper Elite 3500lb - Amr Racing Monster coil - 60 Inch Cat Plow - Amsteel (blue) Synthetic Winch Rope - UHMW Fairlead - Winch Saver - Full Snorkels - Rad Relocation - Uni Air Filter - Modded Stock Exhaust - Dalton Clutch Kit - Fixed Plate Mod - 2.5mm Machined Primary - M109R Injector - VDI Copperhead Ecu - Odyssey PC680 - Bedlined Bumpers - M109R Motor Mounts - Skull Shifter - Red LED`s In Headlights - Led Tail Light - Slim HID Headlights 6k(low`s) - Engine Ice - Heat shielded Side Panels

kewlboxer2 View Member Profile	Nov 3 2009, 11:11 PM Post #6
Advanced Member Group: Team Arcticchat Posts: 104 Joined: 25-August 08 Member No.: 29762 My Location: Bernville, Pennsylvania Your Age: 22 Your ATV: 2007 700 Red 2008 Mileage (ATV): 1000	put some 100% silicone or some RTV black on there before you put the clutch cover on. nice watertight seal might be little difficult getting off, but thats up to you. -------------------- 2007 700EFI Red CopperHead VDI M109R injector IAT relocate Front pushbar 6k HID lows 8k HID Highs 3mm primary machined from ///AIRDAM Secondary mod 90 degrees HosStoppers Stock exhaust mod

Savageman69 View Member Profile View Member Albums	Nov 3 2009, 11:46 PM Post #7
Advanced Member Group: Team Arcticchat Posts: 1470 Joined: 28-March 07 Member No.: 19329 My Location: Huron Park, Ontario, Canada Your Age: 24 Your Sled(s): 1995 Polaris XCR 600 Triple Your ATV: 2007 Arctic Cat 700 EFI	QUOTE (kewlboxer2 @ Nov 3 2009, 11:11 PM) put some 100% silicone or some RTV black on there before you put the clutch cover on. nice watertight seal might be little difficult getting off, but thats up to you. That may work for a bit however due to it being plastic it flexs way to much between all the hot and cold cycles its next to impossible to keep it water tight. Ive pretty much gave up mines as close as its getting lol checked the king 750 and its plastic also -------------------- 2007 Arctic Cat 700 EFI A/C Alloy Rims / 28 Inch Outlaw MST`s - A/C Hand Guards - A/C Heated Grips - 25 Inch ITP 589`s On grey steels - Deluxe Front and Rear Bumpers - Viper Elite 3500lb - Amr Racing Monster coil - 60 Inch Cat Plow - Amsteel (blue) Synthetic Winch Rope - UHMW Fairlead - Winch Saver - Full Snorkels - Rad Relocation - Uni Air Filter - Modded Stock Exhaust - Dalton Clutch Kit - Fixed Plate Mod - 2.5mm Machined Primary - M109R Injector - VDI Copperhead Ecu - Odyssey PC680 - Bedlined Bumpers - M109R Motor Mounts - Skull Shifter - Red LED`s In Headlights - Led Tail Light - Slim HID Headlights 6k(low`s) - Engine Ice - Heat shielded Side Panels

whitley8314 View Member Profile View Member Albums	Nov 4 2009, 04:25 PM Post #8
Member Group: Members Posts: 54 Joined: 21-February 09 Member No.: 35912 My Location: ************** Your Age: 22 Your ATV: 08 Thunder cat	I took thoughs mettle spacers out where the bolt go, I think those where keeping the cover from over tightening on the gasket, maybe that will help, but i have not got to try it yet.

1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)

0 Members:

Display Mode: Standard · Switch to: Linear+ · Switch to: Outline

Time is now: 20th November 2009 - 08:50 PM

Licensed to: ArcticChat.com