Since yesturday(the first ride) our zl has been boggy put of the gate and in the turns where ypu let off then dip into it again. Should i bypass the tps and see if that works or any other ideas?
check the little white washers that go inbetween each part of the throttle and held in with a pin. They commonly break on these sleds and cause the throttle to back off so you think its bogging but its not.
Same thing happened to me.
2000 triple I've been having similar issues with my ZL 580 where did you find your information on the bypass TPS ? ? It would help.. but mines at high Rpm 7000rpm when wanting to Crack it it's like a wall have to wait till 6500rpm then full range again