Quote: Originally Posted by justin1620
Hey fellas, I have an 05 F7 and my rollers in my primary clutch are shot. One of them has a flat spot because the set pin can loose on the weight. Can I replace just the rollers
in the primary or do I need to buy a whole new clutch. What tools are required to do this repair? I'm assuming I'll need some type of spider tool....I've worked on clutches but never separated the spider... ThAnks
Yes, but I believe when you look at the clutch breakdown on a F 7 the spider is only offered as a complete assembly. I used part #'s for pins and rollers from a ZR clutch. I have part #'s at home if you are interested.
Keep in mind you will need a way to secure the clutch to the bench, a special tool to remove the spider, a roll pin punch, and a torch to heat the spider.
It has been awhile, but I don't believe there is a significant savings in rebuilding the spider as opposed to buying a new one.